As previously suggested please read #6671 or may be this one https://github.com/dresden-elektronik/deconz-rest-plugin/issues/6666#issuecomment-1400222659 else refere to HA. Sorry
On HA you need to put the file in the hiden folder /data/.local/share/dresden-elektronik/deCONZ/devices/
yeah i tried it with the name : ZMMINIL2 or ZMMINI-L2
the device is now as on/off Unit but i cant get it in phoscon or Homeassistant
Ha, it s a new modele ?
Can you check the model id ? on the cluster Basic 0x0000, on the attribute list (press “read” to fill the table)
BTW on your capture the device is disconnected.
yeah it disconnects after a few hours, or when i toogle the switch in HA. then the green led goes off and i must pres multiple times the hardware button on the device to get it back on.
i used the ddf for the zbmini and changed the name to zbminil2 and saved it under the other path and hot reloaded it.
here are the sreens
settings 1/2
Settings 2/2
HomeAssistant
This PR support both, the ZBMINI-L and the ZBMINIL2 Add support for Sonoff Zbminil2 by Smanar · Pull Request #6726 · dresden-elektronik/deconz-rest-plugin · GitHub
For the disconnection issue, it’s another problem, perhaps SNZB01 - ConBee-II - Home Assistant disconnnecting
Okay, i get them to work,
But normally this should be repeater and not battery-powered devices that are connected to 230V, but are defined with the DDF as a battery device, how can you change that?
You can’t. The device firmware tells deconz that is battery operated.
Hi Guys,
Can someone tell me in layman’s terms for to get the Sonoff ZB Mini-L2 working with HA?
I have deCONZ installed, but it’s not finding is under any switch or sensor (other)
I’ve tried to understand the above, but there’s no explanations to go with the screen shots.
What am I trying to do here, copy what’s on the screen shots into my setting?
I did see a couple of things that were set to False in my cluster info , True in the screen shots, but was unable to change them?
I’d be grateful for some pointers please.
Dizzwold.
Hello wich one deconz version are you Using ?
HI,
Just updated it to 6.19.0
I also forgot to state previously, I have the Conbee2
Nope your deconz version, visible in phoscon, I don’t know HA numeration.
The PR was merged recently DDF for Sonoff ZBMINIL2 by Smanar · Pull Request #6726 · dresden-elektronik/deconz-rest-plugin · GitHub
Are you asking for the Phoscon GW version?
Okay,
I’ve got it working now.
It was a little over-my-head tbh, but it works.
Weather it works after a restart, I guess we’ll find out.
The video was the most help, so here it is for others if they’re having trouble and can’t find the video;
Dizzwold.
1 Like
If Home Assistant is restarted I loose function and the DDF is gone.
Any ideas?
The DDF is gone ?
But it’s in the official version ? or you have used a custom DDF ?
Hi Smanar,
I’ve just had a look and the DDF is still shown in Deconz, but in HA it states the entity is no longer in use by the Deconz integration.
What is your deconz version ?
Because you are not using the defaut DDF, the one on your picture have “draft” status.
Are you using a custom DDF ?
HI @Smanar,
Thank you for your feedback.
I’m using the deconz interface/addon in Home Assistant (v 6.19.0);
I had noticed that before, that I didn’t have the option to select the different Status types?
In the editor I clicked the ON/OFF Light in the right hand selection area and it implemented the code into the editor/preview area, then I clicked Hot Reload.
It all works up to when I restart/reboot Home Assistant (running on a Raspberry Pi 4b with 120 SSD.
Dizzwold.
Can you check your deconz version in phoscon/gateway ?
You need at least the version 2.22.0, and when you select the device and make edit DDF you need to see this one (in the “preview” tab deconz-rest-plugin/zbmini-l_relay.json at master · dresden-elektronik/deconz-rest-plugin · GitHub
And you capture the path is devices/zblminil2.json, this file was created by yourself, it is not in deconz by defaut.