Was not a path ^^, but using your web browser.
But that you have done is fine, will be the next step.
If your device json don’t have state/x or state/y can explain the issue, so we will use a DDF, and the one you have on picture is probably fine, just need to set it to “gold” (instead of Draft) and save the file.
But if you use the GUI, on the cluster 0x0300, you will be able to set color request. What are you using to change color ? (can be a problem on your third app)
They are not reconised.
This device don’t use DDF, but legacy core.
There is a problem somewhere, it’s a light device, so always reconised by deconz (even badly) so you have something blocking.
As you have the GUI, you can take a look in deconz/help/debug view
Edit:
Ok so if you have the same issue on ZHA, it’s another story, you haven’t updated the device firmware ?
I don’t see what can be blocking in the gateway …
22:38:42:796 DEV create on-the-fly DDF for 0x842E14FFFE01DD0B
22:38:43:628 skip legacy loading 84:2e:14:ff:fe:00:0d:29-01 / HG06106A
22:38:43:630 DB UPDATE device_descriptors SET data = x’f2e0a161000000012100’, timestamp = 1698701923 WHERE device_id = (SELECT id FROM devices WHERE mac = ‘84:2e:14:ff:fe:00:0d:29’) AND endpoint = 242 AND type = 4
22:38:43:632 DB INSERT INTO device_descriptors (device_id, endpoint, type, data, timestamp) SELECT id, 242, 4, x’f2e0a161000000012100’, 1698701923 FROM devices WHERE mac = ‘84:2e:14:ff:fe:00:0d:29’
22:39:48:795 DEV no DDF for 0x842E14FFFE000D29, modelId: TS0505A
22:39:48:796 DEV create on-the-fly DDF for 0x842E14FFFE000D29
I realy don’t see why your device are not reconised (name on 0xXXXX form)
But can make a try with DDF.
On your first picture the DDF can’t work, if you look at the manufacture name and model id, they are “customised” by deconz (yeah realy bad idea to touch that)
On the second picture, the DDF is empty, deconz haven’t reconised the device.
So you need the first DDF contain, with the setting from the second picture, then set the Status to “gold”.
If you can share me an incomplete DDF, I can update it (you will have it in the “preview” tab).
IDK, but I don’t see what on the device can provoke that.
On ZHA you don’t use the software part (deconz) but only the firmware, and for me it work or it don’t work at all, I don’t see how the device can work at 50%.
The bad reconised part can come from a connexion issue, but we have it for sensor, not for light.
For me it’s not a problem of identification because all devices were in the mesh when started to become “white”.
The problem now is Conbee memorized these devices and it’s impossible to delete and pair them again as new ones.
But I found all the devices (I had in Deconz) when I installed ZHA without searching them.
They were immediatly visible and working.
Something more is stored in the stick
In my case, colour temperature still works.
IMHO the problem is in deconz/Conbee otherwise the issue should be visible using other bridges too.
As I said before, devices works ok under Tuya and HUE bridges.
What I can say, everything worked good enough until I added 3 Sonoff ZB mimi 2.0 and 1 LIDL colour lamp.
After 24 hours the issue begun.
But something else is happening because I have a smart plug (Osram) that switches on and off during the day.
System now is not stable.