Wall Switch 4-button recommendation

Bravo43 · March 4, 2024, 11:33pm

Hello,
Having reviewed the wall switch compatibility, it seems the Schneider 4-switch product is
what i’m looking for to control a room - lights off/on, change scene. Currently this is done with a smartphone, or scripts, i just need a manual wall switch in addition.

Particularly like the idea of energy-harvest units.

github.com/dresden-elektronik/deconz-rest-plugin

DDF for Schneider/wiser battery switch FLS/SYSTEM-M/4

dresden-elektronik:master ← Smanar:schneider_4

opened 10:35AM - 01 Oct 22 UTC

Smanar

+4 -4

See https://github.com/dresden-elektronik/deconz-rest-plugin/issues/6141 - Pr…oduct name: WDE002924 - Manufacturer: Scheider Electric - Model identifier: FLS/SYSTEM-M/4 The DDF enable only the on/off, we have tried with @jensflorian to bind other cluster to tests, no success, but can be a different hardware/firmare. Now some information about thoses devices. It seem Schneider play a lot with them, and they are customisable, with features that can be activated/deactivated. They use the manufacture cluster 0xFF17 For this one, even on the hardware we have 4 endpoint, only one is used the 0x15. On the cluster 0xFF17 - For endpoint 0x15, the attribute 0x0020 is "0" for the other 16,17 and 18 it's "1" - For endpoint 0x15, the attribute 0x0001 is "unknown and for the other 16,17 and 18 it's "7f" From Z2m > Depending on the firmware version the device may support both 1-channel and 2-channel mode. In 1-channel mode both the upper and lower buttons works as the upper buttons. On some firmware versions (incl. those sold as Elko EKO07117) the device starts out in 1-channel mode and must be switched into 2-channel mode either by using the Elko / Wiser gateway or by holding down button 1 and 4 (upper left and lower right) for approx. 10 seconds - the led will flash red and the become green once successfull. Edit: I have finally mixed the DDF with the 4 gangs. It's not possible to know if it's a 2 gang or a 4 gang, same firmware, same hardware, it's just a setting, so all devices have same endoint and same cluster, even not used.

Product name: WDE002924
Manufacturer: Scheider Electric
Model identifier: FLS/SYSTEM-M/4

Scenic (also no battery) seem another good choice, but unclear if the 2 button model
can be set up to on/off and select scene.

Does anyone have a purchasing source for these, or is perhaps recent experience with a supported product that works with the latest Phoscon/deConz/Conbee ?

Thanks in Advance.