# Top

**URL:** https://forum.phoscon.de/top.md

[Latest](https://forum.phoscon.de/latest.md) · [Categories](https://forum.phoscon.de/categories.md)

---

## [V2.32.5: deconz.service: Main process exited, code=killed, status=11/SEGV](https://forum.phoscon.de/t/v2-32-5-deconz-service-main-process-exited-code-killed-status-11-segv/6770)

<div class="topic-metadata">

**Author:** [@jan666](https://forum.phoscon.de/u/jan666)\
**Replies:** 55\
**Last updated:** [June 29, 2026, 12:57pm UTC](https://forum.phoscon.de/t/v2-32-5-deconz-service-main-process-exited-code-killed-status-11-segv/6770 "2026-06-29T12:57:25Z")

</div>

I updated to v2.32.5 on 2026-02-06. Today I had 3 (until now) crashes(?) Feb 09 05:51:29 deconzpi systemd\[1\]: deconz.service: Main process exited, code=killed, status=11/SEGV Feb 09 05:51:29 deconzpi systemd\[1\]: deconz.…

---

## [Binding ZGP FOHSWITCH & Shelly 1PM Mini Gen4?](https://forum.phoscon.de/t/binding-zgp-fohswitch-shelly-1pm-mini-gen4/6842)

<div class="topic-metadata">

**Author:** [@unf](https://forum.phoscon.de/u/unf)\
**Replies:** 35\
**Last updated:** [May 21, 2026, 4:25pm UTC](https://forum.phoscon.de/t/binding-zgp-fohswitch-shelly-1pm-mini-gen4/6842 "2026-05-21T16:25:24Z")

</div>

Hi there, my deCONZ bridge is running reliable since a while with just a few device, Ikea Styrbar & Tradfri 30W. Now I am onto replacing some of my EnOcean rocker switches (energy harvesting) & related actuators, with …

---

## [Decons Hinweis bei Update](https://forum.phoscon.de/t/decons-hinweis-bei-update/6694)

<div class="topic-metadata">

**Author:** [@Toster84](https://forum.phoscon.de/u/Toster84)\
**Replies:** 21\
**Last updated:** [December 28, 2025, 9:14am UTC](https://forum.phoscon.de/t/decons-hinweis-bei-update/6694 "2025-12-28T09:14:39Z")

</div>

Hello I have Debian 13.1 installed on my Raspberry Pi with Deconz When I run “sudo apt update && sudo apt full-upgrade”, I get this message: OK:1 http://phoscon.de/apt/deconz bullseye InRelease and the following note…

---

## [IKEA Kajplats GU10 CWS](https://forum.phoscon.de/t/ikea-kajplats-gu10-cws/6791)

<div class="topic-metadata">

**Author:** [@opadbakke0045](https://forum.phoscon.de/u/opadbakke0045)\
**Replies:** 13\
**Last updated:** [July 22, 2026, 12:57pm UTC](https://forum.phoscon.de/t/ikea-kajplats-gu10-cws/6791 "2026-07-22T12:57:47Z")

</div>

Hi all, I can read from this guide that I cannot make a GitHub request for a New Device: Request Device Support · dresden-elektronik/deconz-rest-plugin Wiki · GitHub as my issue exactly is, that the device I would like …

---

## [IKEA Rodret not implemented correctly in Phoscon](https://forum.phoscon.de/t/ikea-rodret-not-implemented-correctly-in-phoscon/6700)

<div class="topic-metadata">

**Author:** [@cds](https://forum.phoscon.de/u/cds)\
**Replies:** 17\
**Last updated:** [January 12, 2026, 7:24am UTC](https://forum.phoscon.de/t/ikea-rodret-not-implemented-correctly-in-phoscon/6700 "2026-01-12T07:24:22Z")

</div>

Hi there, it seems that the newer version of the RODRET switch was missed to be integrated into phoscon APP (in DECONZ it was added). The old switch had the ID “RODRET Dimmer”, while the new one has “RODRET wireless dim…

---

## [Ikea Bilresa does not connect with deCONZ/ConBee II?](https://forum.phoscon.de/t/ikea-bilresa-does-not-connect-with-deconz-conbee-ii/6815)

<div class="topic-metadata">

**Author:** [@carsten\_h](https://forum.phoscon.de/u/carsten_h)\
**Replies:** 10\
**Last updated:** [May 7, 2026, 8:22pm UTC](https://forum.phoscon.de/t/ikea-bilresa-does-not-connect-with-deconz-conbee-ii/6815 "2026-05-07T20:22:54Z")

</div>

Hello! Im sitting here since yesterday to connect a Bilresa (E2489) (bought it in a pack with the Grillplats (E2491-EU) socket) to deCONZ with a Conbee II. But nothing works. I pressed the middle button, the LED begin…

---

## [ConBee 2 stopped working, not showing any link between devices in deCONZ](https://forum.phoscon.de/t/conbee-2-stopped-working-not-showing-any-link-between-devices-in-deconz/6655)

<div class="topic-metadata">

**Author:** [@jbrosowski](https://forum.phoscon.de/u/jbrosowski)\
**Replies:** 13\
**Last updated:** [November 30, 2025, 9:28am UTC](https://forum.phoscon.de/t/conbee-2-stopped-working-not-showing-any-link-between-devices-in-deconz/6655 "2025-11-30T09:28:00Z")

</div>

Hi all, I have a strange problem with my current setup. It is made of a Raspberry Pi (4) running deCONZ and Phoscon, and a ConBee 2 stick. There are approx. 90 devices registered (mostly IKEA, Lumi Switches, nothing st…

---

## [Conbee III lost devices one week after installation](https://forum.phoscon.de/t/conbee-iii-lost-devices-one-week-after-installation/6738)

<div class="topic-metadata">

**Author:** [@DavidMStraub](https://forum.phoscon.de/u/DavidMStraub)\
**Replies:** 21\
**Last updated:** [June 7, 2026, 5:03pm UTC](https://forum.phoscon.de/t/conbee-iii-lost-devices-one-week-after-installation/6738 "2026-06-07T17:03:10Z")

</div>

Hi all, first of all, let me say I’m a great fan of Deconz - it has been running half of my house reliably for 5 years now. I am also aware that there are several threads with issues similar to the one I’m encountering…

---

## [Cannot stop deconz via systemctl](https://forum.phoscon.de/t/cannot-stop-deconz-via-systemctl/6723)

<div class="topic-metadata">

**Author:** [@PatiB87](https://forum.phoscon.de/u/PatiB87)\
**Replies:** 15\
**Last updated:** [July 13, 2026, 1:41pm UTC](https://forum.phoscon.de/t/cannot-stop-deconz-via-systemctl/6723 "2026-07-13T13:41:29Z")

</div>

Hey, I am using deconz in a Debian VM (Debian 11). Now recently I updated deconz and everything else to latest version (2.31.2). It currently works well after a VM restart. But if I want to stop it via sudo systemct…

---

## [Tuya Solar Light Sensor Lux Value always 0](https://forum.phoscon.de/t/tuya-solar-light-sensor-lux-value-always-0/6730)

<div class="topic-metadata">

**Author:** [@tarracoolo](https://forum.phoscon.de/u/tarracoolo)\
**Replies:** 12\
**Last updated:** [January 20, 2026, 5:20pm UTC](https://forum.phoscon.de/t/tuya-solar-light-sensor-lux-value-always-0/6730 "2026-01-20T17:20:22Z")

</div>

Hi! I found following past thread: Light sensor ZSS-QY-LS-C / TS0222\_TZ3000\_8uxxzz4b unknown - #14 by Smanar I have a Tuya Solar Light Sensor from Ali what I did was editing the above DDF, this works to get the device…

---

## [Halt app on Home Assitant complement](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826)

<div class="topic-metadata">

**Author:** [@mhut](https://forum.phoscon.de/u/mhut)\
**Replies:** 21\
**Last updated:** [April 7, 2026, 7:04pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826 "2026-04-07T19:04:43Z")

</div>

Hi. I have a Conbee II usb into a Raspberry Pi 3 running Home Assistant OS. Its plugged through an extension usb cable as recommended Deconz complement and integration installed and working all Ok (i have this setup si…

---

## [Error "connect ECONNREFUSED ..."](https://forum.phoscon.de/t/error-connect-econnrefused/6873)

<div class="topic-metadata">

**Author:** [@Cycle](https://forum.phoscon.de/u/Cycle)\
**Replies:** 14\
**Last updated:** [June 2, 2026, 8:43am UTC](https://forum.phoscon.de/t/error-connect-econnrefused/6873 "2026-06-02T08:43:20Z")

</div>

Problem: All of my devices that were set up under the Phoscon / deconz gateway are unresponsive in HomeKit. The Homebridge log (currently version 2.0.2) regularly shows: \[deCONZ\] warning: 192.168.178.42 config: reques…

---

## [RaspBee2 Pairing and connectivity issues](https://forum.phoscon.de/t/raspbee2-pairing-and-connectivity-issues/6846)

<div class="topic-metadata">

**Author:** [@Tscheurgen](https://forum.phoscon.de/u/Tscheurgen)\
**Replies:** 17\
**Last updated:** [April 28, 2026, 2:59pm UTC](https://forum.phoscon.de/t/raspbee2-pairing-and-connectivity-issues/6846 "2026-04-28T14:59:52Z")

</div>

Hello all, I was running deconz with iobroker and home assistant integration quite long without any issues (except I wasn’t able to connect to Alexa directly anymore). Now due to some major changes I had to upgrade dec…

---

## [All Aqara Prescence stopped working](https://forum.phoscon.de/t/all-aqara-prescence-stopped-working/6731)

<div class="topic-metadata">

**Author:** [@TDehli](https://forum.phoscon.de/u/TDehli)\
**Replies:** 11\
**Last updated:** [January 20, 2026, 4:21pm UTC](https://forum.phoscon.de/t/all-aqara-prescence-stopped-working/6731 "2026-01-20T16:21:56Z")

</div>

I am using several Aqara Prescence Fp1 in my setup, and they have been running smooth for a long time. But a few days ago thed stopped working one after another. They simply stopped reporting. Some of them stopped just …

---

## [Separate a DDF into two versions](https://forum.phoscon.de/t/separate-a-ddf-into-two-versions/6749)

<div class="topic-metadata">

**Author:** [@Cadkey](https://forum.phoscon.de/u/Cadkey)\
**Replies:** 12\
**Last updated:** [February 10, 2026, 6:08pm UTC](https://forum.phoscon.de/t/separate-a-ddf-into-two-versions/6749 "2026-02-10T18:08:27Z")

</div>

I need to separate a DDF. I’m using Sonoff SNZB-02D and SNZB-02P devices. Both use the same DDF. I need frequent temperature readings on the 02P, which drains the battery quickly on the 02D. To solve this problem, I th…

---

## [Unlikely readings from Aqara temperature sensors after deCONZ restart](https://forum.phoscon.de/t/unlikely-readings-from-aqara-temperature-sensors-after-deconz-restart/6805)

<div class="topic-metadata">

**Author:** [@JulioVargas](https://forum.phoscon.de/u/JulioVargas)\
**Replies:** 15\
**Last updated:** [April 7, 2026, 6:31pm UTC](https://forum.phoscon.de/t/unlikely-readings-from-aqara-temperature-sensors-after-deconz-restart/6805 "2026-04-07T18:31:19Z")

</div>

Aqara WSDCGQ11LM deCONZ 2.32.5 Reading values from PWA API with Zabbix. If I restart deCONZ \[because of issues with Home Assistant, see other threads\], the temperatures jump around implausibly: Every temperature h…

---

## [Moes BHT-002 Thermostat with updated model ID TZE204\_xalsoe3m](https://forum.phoscon.de/t/moes-bht-002-thermostat-with-updated-model-id-tze204-xalsoe3m/6748)

<div class="topic-metadata">

**Author:** [@zerogme](https://forum.phoscon.de/u/zerogme)\
**Replies:** 9\
**Last updated:** [February 2, 2026, 5:09pm UTC](https://forum.phoscon.de/t/moes-bht-002-thermostat-with-updated-model-id-tze204-xalsoe3m/6748 "2026-02-02T17:09:06Z")

</div>

I purchased this thermostat as it was listed as compatible with deCONZ. Whilst this is true, the hardware has been updated and as such, the “manufacturename” is not listed in the DDF. The device currently loads as a smar…

---

## [Overriding DDF with Toolbox version](https://forum.phoscon.de/t/overriding-ddf-with-toolbox-version/6833)

<div class="topic-metadata">

**Author:** [@sperbsen](https://forum.phoscon.de/u/sperbsen)\
**Replies:** 10\
**Last updated:** [April 8, 2026, 4:02pm UTC](https://forum.phoscon.de/t/overriding-ddf-with-toolbox-version/6833 "2026-04-08T16:02:09Z")

</div>

deCONZ comes with a ddf file for the SONOFF TRVZB thermostat. However, support there is pretty basic - for example, no control for setting an external temperature, which the device supports. The deCONZ Toolbox has a be…

---

## [Linking a Styrbar E2002 with Conbee II fails every time I try](https://forum.phoscon.de/t/linking-a-styrbar-e2002-with-conbee-ii-fails-every-time-i-try/6910)

<div class="topic-metadata">

**Author:** [@dr0id](https://forum.phoscon.de/u/dr0id)\
**Replies:** 12\
**Last updated:** [August 9, 2026, 8:03am UTC](https://forum.phoscon.de/t/linking-a-styrbar-e2002-with-conbee-ii-fails-every-time-i-try/6910 "2026-08-09T08:03:11Z")

</div>

Hello, I am using a Conbee II on a Raspberry Pi 4 running Openhabian. Every time I try to bind my Ikea Styrbar E2002 switch it just fails after timeout. I’ve got a feeling that it’s related to this line in Settings \> G…

---

## [deCONZ OTA update bricked several smart plugs (Tuya based?)](https://forum.phoscon.de/t/deconz-ota-update-bricked-several-smart-plugs-tuya-based/6915)

<div class="topic-metadata">

**Author:** [@bcutter](https://forum.phoscon.de/u/bcutter)\
**Replies:** 13\
**Last updated:** [August 5, 2026, 2:11pm UTC](https://forum.phoscon.de/t/deconz-ota-update-bricked-several-smart-plugs-tuya-based/6915 "2026-08-05T14:11:53Z")

</div>

After updating to deCONZ v2.33.2 I checked out the OTA update feature after consolidating Zigbee OTA Updates and GitHub - dresden-elektronik/deconz-ota-plugin: Server side implementation of the standard Zigbee OTA protoc…

---

## [Shelly 2PM Gen4 no power data](https://forum.phoscon.de/t/shelly-2pm-gen4-no-power-data/6932)

<div class="topic-metadata">

**Author:** [@Olli](https://forum.phoscon.de/u/Olli)\
**Replies:** 11\
**Last updated:** [September 15, 2026, 7:16pm UTC](https://forum.phoscon.de/t/shelly-2pm-gen4-no-power-data/6932 "2026-09-15T19:16:26Z")

</div>

Hi, i am using last stable Version 2.32.5. There is no still no power data displayed for shelly 2PM Gen4 See https://github.com/dresden-elektronik/deconz-rest-plugin/issues/8316

---

## [Only direct connecteted devices ... no next hop](https://forum.phoscon.de/t/only-direct-connecteted-devices-no-next-hop/6923)

<div class="topic-metadata">

**Author:** [@dkotte](https://forum.phoscon.de/u/dkotte)\
**Replies:** 12\
**Last updated:** [August 24, 2026, 3:27pm UTC](https://forum.phoscon.de/t/only-direct-connecteted-devices-no-next-hop/6923 "2026-08-24T15:27:05Z")

</div>

Hi all, some days ago, my local zigbee cloud dies. In deCONZ i see only connections directly to the conBEE-II. Software is running as docker, so i tried old versions without success. everytime the same behaviour. Dev…

---

## [Segmentation fault in import of old backup (was: Can't contact RaspBee II after reinstall)](https://forum.phoscon.de/t/segmentation-fault-in-import-of-old-backup-was-cant-contact-raspbee-ii-after-reinstall/6921)

<div class="topic-metadata">

**Author:** [@Man-Grove](https://forum.phoscon.de/u/Man-Grove)\
**Replies:** 10\
**Last updated:** [August 29, 2026, 12:43pm UTC](https://forum.phoscon.de/t/segmentation-fault-in-import-of-old-backup-was-cant-contact-raspbee-ii-after-reinstall/6921 "2026-08-29T12:43:00Z")

</div>

After a reinstall of an original Pi Zero with Trixie, the RaspBee II isn’t reliably detected. It worked fine until reinstalling. Phoscon says “Firmware Not connected”. Firmware is the latest. sudo GCFFlasher\_internal -l …

---

## [2.32.5 Iobroker Adapter Deconz Websocket Issues](https://forum.phoscon.de/t/2-32-5-iobroker-adapter-deconz-websocket-issues/6764)

<div class="topic-metadata">

**Author:** [@deadmedusa](https://forum.phoscon.de/u/deadmedusa)\
**Replies:** 7\
**Last updated:** [February 8, 2026, 1:56pm UTC](https://forum.phoscon.de/t/2-32-5-iobroker-adapter-deconz-websocket-issues/6764 "2026-02-08T13:56:37Z")

</div>

After Updating my deconz-Docker to 2.32.5 its not possible to get a connection with the iobroker deconz adapter. The log message in iobroker is: Could not connect to websocket instance of deConz/Phoscon. Error: socket h…

---

## [Cannot install on raspberry debian trixie](https://forum.phoscon.de/t/cannot-install-on-raspberry-debian-trixie/6699)

<div class="topic-metadata">

**Author:** [@lightwsitch](https://forum.phoscon.de/u/lightwsitch)\
**Replies:** 3\
**Last updated:** [December 22, 2025, 3:42pm UTC](https://forum.phoscon.de/t/cannot-install-on-raspberry-debian-trixie/6699 "2025-12-22T15:42:25Z")

</div>

Hi i was trying to install deconz but it looks impossible at the moment on debian trixie 13.1 on a raspberry pi 4b 4GB. I followed the official Debian setup instructions. This is my /etc/apt/sources.list: deb \[signed-…

---

## [Add DDF for Aqara FP300 Presence Multi Sensor #8425](https://forum.phoscon.de/t/add-ddf-for-aqara-fp300-presence-multi-sensor-8425/6705)

<div class="topic-metadata">

**Author:** [@Didier3L](https://forum.phoscon.de/u/Didier3L)\
**Replies:** 6\
**Last updated:** [January 1, 2026, 5:48pm UTC](https://forum.phoscon.de/t/add-ddf-for-aqara-fp300-presence-multi-sensor-8425/6705 "2026-01-01T17:48:36Z")

</div>

Hello, I managed to purchase the Aqara FP300 Presence Multi Sensor. I saw that a pull request has been submitted for this device. I’m using Deconz with a Docker container named deconz-community. I mapped the direct…

---

## [\[solved\] Shelly Mini 1PM gen 4: Power value fault](https://forum.phoscon.de/t/solved-shelly-mini-1pm-gen-4-power-value-fault/6795)

<div class="topic-metadata">

**Author:** [@Olli](https://forum.phoscon.de/u/Olli)\
**Replies:** 8\
**Last updated:** [March 6, 2026, 5:21am UTC](https://forum.phoscon.de/t/solved-shelly-mini-1pm-gen-4-power-value-fault/6795 "2026-03-06T05:21:03Z")

</div>

Hi, the power value is not displayed correctly in Phoscon App.

---

## [Conbee III unresponsive and not flashable](https://forum.phoscon.de/t/conbee-iii-unresponsive-and-not-flashable/6784)

<div class="topic-metadata">

**Author:** [@deadmedusa](https://forum.phoscon.de/u/deadmedusa)\
**Replies:** 8\
**Last updated:** [February 28, 2026, 1:44pm UTC](https://forum.phoscon.de/t/conbee-iii-unresponsive-and-not-flashable/6784 "2026-02-28T13:44:47Z")

</div>

Hi, since yesterday I’m facing a big problem with my Conbee III. After updating my docker from 2.31.2 to 2.32.5 the conbee III became completely unresponsive after the docker booted. No connection to any device. So I d…

---

## [Raspberry Pi Installation](https://forum.phoscon.de/t/raspberry-pi-installation/6703)

<div class="topic-metadata">

**Author:** [@Luigi-01](https://forum.phoscon.de/u/Luigi-01)\
**Replies:** 6\
**Last updated:** [December 29, 2025, 5:26am UTC](https://forum.phoscon.de/t/raspberry-pi-installation/6703 "2025-12-29T05:26:06Z")

</div>

I noticed that the installation of deConz is broken. This is for Raspberry Pi and Ubuntu. Import Phoscon public key does not work: bash: sudo: command not found gpg: \[stdout\]: write error: Broken pipe gpg: error wr…

---

## [V2.32.5: websocket port switched to 80 after update from 2.31.2](https://forum.phoscon.de/t/v2-32-5-websocket-port-switched-to-80-after-update-from-2-31-2/6781)

<div class="topic-metadata">

**Author:** [@MaxG](https://forum.phoscon.de/u/MaxG)\
**Replies:** 1\
**Last updated:** [February 16, 2026, 11:25am UTC](https://forum.phoscon.de/t/v2-32-5-websocket-port-switched-to-80-after-update-from-2-31-2/6781 "2026-02-16T11:25:28Z")

</div>

Hi, today I updated deconz from 2.31.2 to 2.32.5. After that my NodeRed instance got not notified anymore and the Phoscon-GW node was regulary showing the following error: WebSocket error: Error: connect ECONNREFUSED …

---

## [Github Repo of the Thread Firmware for ConBee III?](https://forum.phoscon.de/t/github-repo-of-the-thread-firmware-for-conbee-iii/6657)

<div class="topic-metadata">

**Author:** [@jjo](https://forum.phoscon.de/u/jjo)\
**Replies:** 4\
**Last updated:** [December 8, 2025, 12:39pm UTC](https://forum.phoscon.de/t/github-repo-of-the-thread-firmware-for-conbee-iii/6657 "2025-12-08T12:39:13Z")

</div>

Hi all, thanks for the nice hardware and work. I was just wondering whether the Source Code of the Thread Firmware for the ConbeeIII is also available somewhere? I found the repo for the ConbeeII (GitHub - dresden-elekt…

---

## [Deconz WebSocket](https://forum.phoscon.de/t/deconz-websocket/6712)

<div class="topic-metadata">

**Author:** [@Toster84](https://forum.phoscon.de/u/Toster84)\
**Replies:** 4\
**Last updated:** [December 30, 2025, 6:08pm UTC](https://forum.phoscon.de/t/deconz-websocket/6712 "2025-12-30T18:08:57Z")

</div>

Good evening I’ve noticed that after the beta update, the WebSocket connection in FHEM is dropping, causing events to arrive 40 seconds late. Before the update, it was real-time. It’s real-time in the Phoscon app. I’ve …

---

## [Pairing Issue Sonoff SNZB-02DR2](https://forum.phoscon.de/t/pairing-issue-sonoff-snzb-02dr2/6756)

<div class="topic-metadata">

**Author:** [@robv2](https://forum.phoscon.de/u/robv2)\
**Replies:** 4\
**Last updated:** [February 4, 2026, 7:11am UTC](https://forum.phoscon.de/t/pairing-issue-sonoff-snzb-02dr2/6756 "2026-02-04T07:11:15Z")

</div>

My Sonoff SNZB-02DR2 temperature sensor does not want to be recognized. It is there in Deconz but not as a valid device. On the other hand, my SNZB-02D is pairing perfectly. There is some difference between those two te…

---

## [No sensor value updates after deCONZ update](https://forum.phoscon.de/t/no-sensor-value-updates-after-deconz-update/6811)

<div class="topic-metadata">

**Author:** [@Hirgo](https://forum.phoscon.de/u/Hirgo)\
**Replies:** 4\
**Last updated:** [March 14, 2026, 6:08pm UTC](https://forum.phoscon.de/t/no-sensor-value-updates-after-deconz-update/6811 "2026-03-14T18:08:55Z")

</div>

Hi there, I was successfully using deCONZ with a ConBee II for many years with Home Assistant to integrate my Aqara sensors. After updating some items, I still have my configuration but Phoscon is not showing any value…

---

## [deCONZ does loop after upgrade to Trixie](https://forum.phoscon.de/t/deconz-does-loop-after-upgrade-to-trixie/6726)

<div class="topic-metadata">

**Author:** [@unf](https://forum.phoscon.de/u/unf)\
**Replies:** 5\
**Last updated:** [January 13, 2026, 3:46pm UTC](https://forum.phoscon.de/t/deconz-does-loop-after-upgrade-to-trixie/6726 "2026-01-13T15:46:44Z")

</div>

Hi there, have upgraded my “Raspberry PI 3” based Phoscon appliance for my Raspbee II to “Raspian OS 13 (Trixie)”, overcoming all challenges, accept the deconz service(s) … I have installed deconz-qt6 package out of be…

---

## [FLS-PP F/W upgrade not working](https://forum.phoscon.de/t/fls-pp-f-w-upgrade-not-working/6760)

<div class="topic-metadata">

**Author:** [@KipiKland](https://forum.phoscon.de/u/KipiKland)\
**Replies:** 3\
**Last updated:** [March 15, 2026, 12:00pm UTC](https://forum.phoscon.de/t/fls-pp-f-w-upgrade-not-working/6760 "2026-03-15T12:00:28Z")

</div>

I am using 2 FLS-PP with Home assistant / Zigbeeto MQTT Stack and recently my leds started to stay steady green upon powering up. I checked the forum and this looked to be the same behaviour as Hue Bridge V3 bug. i can p…

---

## [Webserver unreachable after some time](https://forum.phoscon.de/t/webserver-unreachable-after-some-time/6754)

<div class="topic-metadata">

**Author:** [@derferd1](https://forum.phoscon.de/u/derferd1)\
**Replies:** 6\
**Last updated:** [February 14, 2026, 3:41pm UTC](https://forum.phoscon.de/t/webserver-unreachable-after-some-time/6754 "2026-02-14T15:41:12Z")

</div>

Debian 13 Deconz 2.32.4-beta Webserver port 80 When I restart deconz in systemctl I can reach the webserver without a problem and even commands via Alexa are executed instantly. But after some time, maybe one hour, t…

---

## [Riesige Phoscon-GW Probleme](https://forum.phoscon.de/t/riesige-phoscon-gw-probleme/6757)

<div class="topic-metadata">

**Author:** [@Matthias\_Knauff](https://forum.phoscon.de/u/Matthias_Knauff)\
**Replies:** 3\
**Last updated:** [February 6, 2026, 6:56am UTC](https://forum.phoscon.de/t/riesige-phoscon-gw-probleme/6757 "2026-02-06T06:56:47Z")

</div>

Hi, Ich habe hartnäckige Probleme mit dem Phoscon-GW auf dem Raspi in Docker. Wie Ihr sehen könnt habe ich komische Gruppen die ich nie angelegt habe. Wenn ich versuche eine Gruppe wie „Deckenstrahler“ anzulegen, kommt …

---

## [FLS-M Feature Request - Enhanced Support for Dual IC WS2811 RGBCCT LED Strips](https://forum.phoscon.de/t/fls-m-feature-request-enhanced-support-for-dual-ic-ws2811-rgbcct-led-strips/6771)

<div class="topic-metadata">

**Author:** [@chipxsd](https://forum.phoscon.de/u/chipxsd)\
**Replies:** 3\
**Last updated:** [October 6, 2026, 10:07am UTC](https://forum.phoscon.de/t/fls-m-feature-request-enhanced-support-for-dual-ic-ws2811-rgbcct-led-strips/6771 "2026-10-06T10:07:56Z")

</div>

I am using the FLS-M LED controller with a BTF-LIGHTING WS2811 Dual IC RGBCCT FCOB COB LED Strip (140 segments). The strip features an interleaved design, with odd ICs controlling RGB segments and even ICs managing WW (w…

---

## [Installation of deConz 2.32.5 fails on Trixie / Pi1B?](https://forum.phoscon.de/t/installation-of-deconz-2-32-5-fails-on-trixie-pi1b/6763)

<div class="topic-metadata">

**Author:** [@ITBeheer4Home](https://forum.phoscon.de/u/ITBeheer4Home)\
**Replies:** 1\
**Last updated:** [February 7, 2026, 1:38pm UTC](https://forum.phoscon.de/t/installation-of-deconz-2-32-5-fails-on-trixie-pi1b/6763 "2026-02-07T13:38:14Z")

</div>

sudo apt install deconz Solving dependencies… Error! Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required …

---

## [Unable to pair TRADFRI LED 345lm, GU10, LED2106R3](https://forum.phoscon.de/t/unable-to-pair-tradfri-led-345lm-gu10-led2106r3/6654)

<div class="topic-metadata">

**Author:** [@KosrenDQ](https://forum.phoscon.de/u/KosrenDQ)\
**Replies:** 6\
**Last updated:** [November 29, 2025, 3:09pm UTC](https://forum.phoscon.de/t/unable-to-pair-tradfri-led-345lm-gu10-led2106r3/6654 "2025-11-29T15:09:49Z")

</div>

Greetings :smiley: I bought a new IKEA light bulb, as described in the title. Unfortunately, I am not able to pair the bulb with deCONZ. I tried resetting the bulb multiple times, but it still does not appear in the Ph…

---

## [Excessive TCP connections](https://forum.phoscon.de/t/excessive-tcp-connections/6651)

<div class="topic-metadata">

**Author:** [@Nosion](https://forum.phoscon.de/u/Nosion)\
**Replies:** 4\
**Last updated:** [December 4, 2025, 10:30pm UTC](https://forum.phoscon.de/t/excessive-tcp-connections/6651 "2025-12-04T22:30:40Z")

</div>

Hi all, Haven’t been able to find any solution to this issue - hope someone can help. Using Debian 12 Since I have updated to Deconz 2.32.1 TCP connections that are opened by deconz continues to rise until the service…

---

## [OTBR Docker won’t start with ConBee II flashed with openthread‑r21 — Spinel timeouts / baud rate issues](https://forum.phoscon.de/t/otbr-docker-won-t-start-with-conbee-ii-flashed-with-openthread-r21-spinel-timeouts-baud-rate-issues/6742)

<div class="topic-metadata">

**Author:** [@temptemptemp](https://forum.phoscon.de/u/temptemptemp)\
**Replies:** 0\
**Last updated:** [January 19, 2026, 7:14pm UTC](https://forum.phoscon.de/t/otbr-docker-won-t-start-with-conbee-ii-flashed-with-openthread-r21-spinel-timeouts-baud-rate-issues/6742 "2026-01-19T19:14:15Z")

</div>

Hi all, I’m trying to run an OpenThread Border Router (OTBR) in Docker using a ConBee II stick flashed with OpenThread RCP firmware from this repo: https://github.com/dresden-elektronik/openthread-r21 …

---

## [SNZB-02WD in deconz, but not in Phoscon](https://forum.phoscon.de/t/snzb-02wd-in-deconz-but-not-in-phoscon/6678)

<div class="topic-metadata">

**Author:** [@iso\_the\_strange](https://forum.phoscon.de/u/iso_the_strange)\
**Replies:** 3\
**Last updated:** [December 9, 2025, 10:45am UTC](https://forum.phoscon.de/t/snzb-02wd-in-deconz-but-not-in-phoscon/6678 "2025-12-09T10:45:24Z")

</div>

Hello, I’ve got issues integrating a new temp / humid sensor into my environment. Running deconz on Docker on Synology (deconzcommunity/deconz), Home Assistant is the frontend. I recently got a new sensor that goes in…

---

## [Support for the Moisture sensor?](https://forum.phoscon.de/t/support-for-the-moisture-sensor/6888)

<div class="topic-metadata">

**Author:** [@Smanar](https://forum.phoscon.de/u/Smanar)\
**Replies:** 0\
**Last updated:** [June 13, 2026, 7:07am UTC](https://forum.phoscon.de/t/support-for-the-moisture-sensor/6888 "2026-06-13T07:07:14Z")

</div>

Hello, there is more and more device using the ZHAMoisture. Would it be possible to add support in Phoscon?

---

## ["This is not the page you are looking" error](https://forum.phoscon.de/t/this-is-not-the-page-you-are-looking-error/6813)

<div class="topic-metadata">

**Author:** [@Rostrocov](https://forum.phoscon.de/u/Rostrocov)\
**Replies:** 3\
**Last updated:** [March 18, 2026, 3:35pm UTC](https://forum.phoscon.de/t/this-is-not-the-page-you-are-looking-error/6813 "2026-03-18T15:35:20Z")

</div>

Good evening, With the latest stable version of deCONZ, after a certain amount of time (I’m not sure how long), I can no longer access the Phoscon web interface. and this message appears : This is not the page you are…

---

## [Wing TS0201 variant](https://forum.phoscon.de/t/wing-ts0201-variant/6899)

<div class="topic-metadata">

**Author:** [@JulioVargas](https://forum.phoscon.de/u/JulioVargas)\
**Replies:** 6\
**Last updated:** [October 5, 2026, 8:29pm UTC](https://forum.phoscon.de/t/wing-ts0201-variant/6899 "2026-10-05T20:29:40Z")

</div>

Deconz 2.32.5 I guess this is yet another TS0201 variant. Box is labelled UZ-1T. I have it paired. I see Wing TS0201 is added here: so I have just dropped that in to /usr/share/deCONZ/devices/tuya/ on top of the ori…

---

## [ConBeeIII stops working](https://forum.phoscon.de/t/conbeeiii-stops-working/6855)

<div class="topic-metadata">

**Author:** [@GVBS](https://forum.phoscon.de/u/GVBS)\
**Replies:** 3\
**Last updated:** [May 1, 2026, 9:14pm UTC](https://forum.phoscon.de/t/conbeeiii-stops-working/6855 "2026-05-01T21:14:23Z")

</div>

After installing successfully 3 Zigbee items, ConBeeIII stops working. lsusb shows the stick in /dev/serial-by-id/… GW-Version 2.35.5 FW-Version 26510900 Home-Assistant (green) Logger says ‘zigpy\_deconz.uart’, Quelle…

---

## [SONOFF Sensors temperature\_precision](https://forum.phoscon.de/t/sonoff-sensors-temperature-precision/6775)

<div class="topic-metadata">

**Author:** [@jan666](https://forum.phoscon.de/u/jan666)\
**Replies:** 3\
**Last updated:** [February 13, 2026, 4:19pm UTC](https://forum.phoscon.de/t/sonoff-sensors-temperature-precision/6775 "2026-02-13T16:19:05Z")

</div>

I always wondered why some of my SONOFF sensor report 2 decimal places, some others just one. Now I found out on Zigbee2MQTT it’s possible to set a temperature\_precision SONOFF SNZB-02D control via MQTT | Zigbee2MQTT. Bu…

---

## [deCONZ sends rubbish "current summation delivered" for TS0121 + TS011F during deCONZ restart](https://forum.phoscon.de/t/deconz-sends-rubbish-current-summation-delivered-for-ts0121-ts011f-during-deconz-restart/6660)

<div class="topic-metadata">

**Author:** [@bcutter](https://forum.phoscon.de/u/bcutter)\
**Replies:** 5\
**Last updated:** [December 15, 2025, 3:57pm UTC](https://forum.phoscon.de/t/deconz-sends-rubbish-current-summation-delivered-for-ts0121-ts011f-during-deconz-restart/6660 "2025-12-15T15:57:27Z")

</div>

When deCONZ restarts, deCONZ sometimes sends rubbish values for 0x0000 Current Summation Delivered in 0702 Simple Metering cluster for devices of types TS0121 (TZ3000\_g5xawfcq) BlitzWolf Electricity Metering 16A EU Pl…

[Next page](https://forum.phoscon.de/top.md?page=1&per_page=50)
