# Support for the Moisture sensor?

**URL:** <https://forum.phoscon.de/t/support-for-the-moisture-sensor/6888>\
**Category:** Feature Requests\
**Created:** [June 13, 2026, 7:07am UTC](https://forum.phoscon.de/t/support-for-the-moisture-sensor/6888 "2026-06-13T07:07:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Smanar](https://forum.phoscon.de/user_avatar/forum.phoscon.de/smanar/32/60_2.png) [@Smanar](https://forum.phoscon.de/u/Smanar)\
**Post date:** [June 13, 2026, 7:07am UTC](https://forum.phoscon.de/t/support-for-the-moisture-sensor/6888/1 "2026-06-13T07:07:14Z")

</div>

Hello, there is more and more device using the ZHAMoisture.

Would it be possible to add support in Phoscon?

> [@\[Beginner\] Moisture channel missing at moisture sensor?](https://forum.phoscon.de/t/beginner-moisture-channel-missing-at-moisture-sensor/2189):
>
> Hi there, I am facing a problem with a [moisture sensor](https://forum.iobroker.net/topic/43715/verkaufe-zigbee-bodenfeuchtesensor/74?_=1656399132325): in Phoscon App (and therefore in openhab) the sensor does not show all measured values, but only some of them. Light [Lux], pressure [hPa] and humidity [%] - all of them are 0 since the sensor does not measure them, but the chip is actually prepared to measure it. Additionally, the battery SOC [%] is shown correctly. Unfortunately the only value which I am interested in is moisture which is not shown: I guess that the moist…
