# Starting deCONZ fails on bulleye

**URL:** <https://forum.phoscon.de/t/starting-deconz-fails-on-bulleye/1287>\
**Category:** Setup Support\
**Created:** [January 4, 2022, 12:52pm UTC](https://forum.phoscon.de/t/starting-deconz-fails-on-bulleye/1287 "2022-01-04T12:52:01Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![conrpi](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/c/a4c791/32.png) [@conrpi](https://forum.phoscon.de/u/conrpi)\
**Post date:** [January 4, 2022, 12:52pm UTC](https://forum.phoscon.de/t/starting-deconz-fails-on-bulleye/1287/1 "2022-01-04T12:52:01Z")

</div>

Hi,

I’m new to this forum.  
I successfully installed the decons pkgs following: [ConBee II Installation](https://www.phoscon.de/en/conbee2/install#raspbian).  
But I use Raspbian Bulleye.

In the menu I see Programming\>deCONZ, but it fails to open.  
When I run it on the cmd line it fails

```auto
pi@raspberrypi:~ $ /usr/bin/deCONZ-autostart.sh
warning unsupported
missing dependency wiringpi
fix with: sudo apt install -f

```

I’m not able to install wiringpi, as it seems to be deprecated.  
And I read that deCONZ is only supported up to Buster.

What is the timeline for the support of deCONZ for bulleye?  
or should I start over again using Buster?

Regards

---

<div class="post-metadata">

**Author:** ![Mimiix](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mimiix/32/10_2.png) [@Mimiix](https://forum.phoscon.de/u/Mimiix)\
**Post date:** [January 4, 2022, 1:13pm UTC](https://forum.phoscon.de/t/starting-deconz-fails-on-bulleye/1287/2 "2022-01-04T13:13:02Z")

</div>

As far as i know you don’t need auto-start.sh. What happens if you run sudo systemctl start deconz-gui ?

---

<div class="post-metadata">

**Author:** ![conrpi](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/c/a4c791/32.png) [@conrpi](https://forum.phoscon.de/u/conrpi)\
**Post date:** [January 4, 2022, 1:58pm UTC](https://forum.phoscon.de/t/starting-deconz-fails-on-bulleye/1287/3 "2022-01-04T13:58:14Z")

</div>

This …

```auto
sudo systemctl start deconz-gui

```

works. But the menu entry does not open the GUI

_Menu \> Programming \> deCONZ_

---

<div class="post-metadata">

**Author:** ![Mimiix](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mimiix/32/10_2.png) [@Mimiix](https://forum.phoscon.de/u/Mimiix)\
**Post date:** [January 4, 2022, 2:51pm UTC](https://forum.phoscon.de/t/starting-deconz-fails-on-bulleye/1287/4 "2022-01-04T14:51:27Z")

</div>

[@de\_employees](https://forum.phoscon.de/groups/de_employees) perhaps we need to remove the dependency of wiring pi here.

@conrpi you probably need to edit the shortcut in that case.

---

<div class="post-metadata">

**Author:** ![Gautama](https://forum.phoscon.de/user_avatar/forum.phoscon.de/gautama/32/20_2.png) [@Gautama](https://forum.phoscon.de/u/Gautama)\
**Post date:** [January 10, 2022, 3:06pm UTC](https://forum.phoscon.de/t/starting-deconz-fails-on-bulleye/1287/5 "2022-01-10T15:06:40Z")

</div>

Did you configure the APT repository?

1. Configure the APT repository for deCONZ **Stable**

```auto
sudo sh -c "echo 'deb http://phoscon.de/apt/deconz \
            $(lsb_release -cs) main' > \
            /etc/apt/sources.list.d/deconz.list"

```

2._Beta_\* (alternative)

```auto
sudo sh -c "echo 'deb http://phoscon.de/apt/deconz \
            $(lsb_release -cs)-beta main' > \
            /etc/apt/sources.list.d/deconz.list"

```

(stable or beta depends on which deCONZ version you use)