# Set default txpower Conbee III

**URL:** <https://forum.phoscon.de/t/set-default-txpower-conbee-iii/6956>\
**Category:** Dresden-Elektronik Hardware\
**Created:** [October 28, 2026, 4:51pm UTC](https://forum.phoscon.de/t/set-default-txpower-conbee-iii/6956 "2026-10-28T16:51:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![gab](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/g/bb73d2/32.png) [@gab](https://forum.phoscon.de/u/gab)\
**Post date:** [October 28, 2026, 4:51pm UTC](https://forum.phoscon.de/t/set-default-txpower-conbee-iii/6956/1 "2026-10-28T16:51:53Z")

</div>

Hi,

I want to increase the default transmission power of Conbee III running Thread firmware from 5 dBm to 10 dBm. Publishing the source modifications mentions [here](https://forum.phoscon.de/t/github-repo-of-the-thread-firmware-for-conbee-iii/6657/3) would also be helpful.

---

<div class="post-metadata">

**Author:** ![manup](https://forum.phoscon.de/user_avatar/forum.phoscon.de/manup/32/9_2.png) [@manup](https://forum.phoscon.de/u/manup)\
**Post date:** [November 4, 2026, 9:59am UTC](https://forum.phoscon.de/t/set-default-txpower-conbee-iii/6956/2 "2026-11-04T09:59:05Z")

</div>

Hi,

I did a little research, there is no good solution here without modifying the add-on.

Assuming you’re using the HA add-on? In that case the power is set by the Home Assistant OpenThread Border Router add-on, not the firmware. From host side it requests 6 dBm at every startup, and there’s no setting for it in the add-on options. You can change it only from a shell on the Home Assistant host:

`docker exec -it addon_core_openthread_border_router ot-ctl txpower 10`

But this is not persistent and would be reconfigured next time add-on starts. Also good to know the shown 5 dBm are actually 5.8 dBm just shown clipped according to my quick research.
