# No HomeBridge Pin code

**URL:** <https://forum.phoscon.de/t/no-homebridge-pin-code/185>\
**Category:** Bug reports\
**Created:** [July 23, 2021, 1:18am UTC](https://forum.phoscon.de/t/no-homebridge-pin-code/185 "2021-07-23T01:18:25Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![nimble](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/n/a5b964/32.png) [@nimble](https://forum.phoscon.de/u/nimble)\
**Post date:** [July 23, 2021, 1:18am UTC](https://forum.phoscon.de/t/no-homebridge-pin-code/185/1 "2021-07-23T01:18:25Z")

</div>

I’ve installed a fresh RPi image Phoscon\_Gateway\_Homebridge\_2021-07-05

There is no pin code listed for homebridge. Ive tried resetting homebridge (reset button), rebooting, etc. Ideas?

I think I have a pattern - please confirm so we can escalate this to a bug if correct.

1. use a Phoscon-supplied SD card image which DOES NOT have homebridge support, and take backup of your gateway configuration.
2. overwrite your SD card with a Phoscon-supplied SD card image which DOES have homebridge support.
3. Boot the pi, note that you will see a HomeBridge PIN code.
4. Restore the backup of your configuration

\*\* you now see that a HomeBridge PIN code is not available \*\*

 ![image](https://forum.phoscon.de/uploads/default/original/1X/0d5c6fdde260e55b3c667503c59aef42a7417964.png)

---

<div class="post-metadata">

**Author:** ![nimble](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/n/a5b964/32.png) [@nimble](https://forum.phoscon.de/u/nimble)\
**Post date:** [July 23, 2021, 2:42am UTC](https://forum.phoscon.de/t/no-homebridge-pin-code/185/2 "2021-07-23T02:42:56Z")

</div>

Actually… I’ve just done a fresh install of Phoscon GW + Homebridge, and immediately it came up without a pin available.

---

<div class="post-metadata">

**Author:** ![nimble](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/n/a5b964/32.png) [@nimble](https://forum.phoscon.de/u/nimble)\
**Post date:** [July 23, 2021, 3:31am UTC](https://forum.phoscon.de/t/no-homebridge-pin-code/185/3 "2021-07-23T03:31:32Z")

</div>

Aha! Another variation!  
I did another clean install of Phoscon\_Gateway\_Homebridge\_2021-07-05.xz and I got a pin code.  
However, after rebooting I just get “Homebridge is currently being installed” shown on the Advanced Settings screen.  
Waiting for several minutes, and that message doesnt go away. Note: it was not set to auto-update Homebridge…

Why so many different behaviors?

---

<div class="post-metadata">

**Author:** ![Mimiix](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mimiix/32/10_2.png) [@Mimiix](https://forum.phoscon.de/u/Mimiix)\
**Post date:** [July 23, 2021, 7:20am UTC](https://forum.phoscon.de/t/no-homebridge-pin-code/185/4 "2021-07-23T07:20:53Z")

</div>

Moving from Phoscon App - General Support to Phoscon App - Bug Reports

---

<div class="post-metadata">

**Author:** ![ChrisHae](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/c/e5b9ba/32.png) [@ChrisHae](https://forum.phoscon.de/u/ChrisHae)\
**Post date:** [July 26, 2021, 10:05am UTC](https://forum.phoscon.de/t/no-homebridge-pin-code/185/5 "2021-07-26T10:05:51Z")

</div>

When Homebridge could be installed with the Phoscon Homebridge Image once it should also work next time. But installation will take a few minutes after the RPI boots and internet connection is mandatory and also that the RPI has correct date and time.

So does it install Homebridge now?

I would not exclude that it really is a bug related to the backup. If it still shows no pin could you check your homebridge configuration file (~/.homebridge/config.json) if there is a key.
