# Motions sensors turning on randomly

**URL:** <https://forum.phoscon.de/t/motions-sensors-turning-on-randomly/4927>\
**Category:** General\
**Created:** [June 13, 2024, 4:21am UTC](https://forum.phoscon.de/t/motions-sensors-turning-on-randomly/4927 "2024-06-13T04:21:23Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![MBM1982](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/m/e274bd/32.png) [@MBM1982](https://forum.phoscon.de/u/MBM1982)\
**Post date:** [June 13, 2024, 4:21am UTC](https://forum.phoscon.de/t/motions-sensors-turning-on-randomly/4927/1 "2024-06-13T04:21:23Z")

</div>

Hi!

I have several Tradfri motion sensors. All of them are triggering their lights/groups randomly. I am sure no person/animal triggers the light since I have checked it with two of them, which have been in a box in drawer. So since it’s not Schrödingers cat…  
They are not doing it all at the same time.  
It’s not new. They have been doing it since quite a while. I just didn’t care, till now since I have added the lighting of our “bikeport” to a motion sensor, which has been connected already in a different use case.  
I will add a new motion sensor today and will check this one, if it might just bee the old ones.

Anyone a tipp on how to correct the behavior?(without setting everything up again)

Thanks!

---

<div class="post-metadata">

**Author:** ![Viking](https://forum.phoscon.de/user_avatar/forum.phoscon.de/viking/32/1643_2.png) [@Viking](https://forum.phoscon.de/u/Viking)\
**Post date:** [June 13, 2024, 11:16am UTC](https://forum.phoscon.de/t/motions-sensors-turning-on-randomly/4927/2 "2024-06-13T11:16:11Z")

</div>

What firmware version do you have in your IKEA motion sensors?  
Which version of deConz are yourunning?  
How are they connected? Conbee II or Conbee III

---

<div class="post-metadata">

**Author:** ![MBM1982](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/m/e274bd/32.png) [@MBM1982](https://forum.phoscon.de/u/MBM1982)\
**Post date:** [June 13, 2024, 6:28pm UTC](https://forum.phoscon.de/t/motions-sensors-turning-on-randomly/4927/3 "2024-06-13T18:28:28Z")

</div>

They are connected via Conbee II  
Gateway 2.26.3.  
Firmware 26780700

Tradfri 2.0.022

---

<div class="post-metadata">

**Author:** ![harnik](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/h/e480ec/32.png) [@harnik](https://forum.phoscon.de/u/harnik)\
**Post date:** [June 15, 2024, 12:09pm UTC](https://forum.phoscon.de/t/motions-sensors-turning-on-randomly/4927/4 "2024-06-15T12:09:45Z")

</div>

I’ve got same problem with Tradfri.

---

<div class="post-metadata">

**Author:** ![ChrisHae](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/c/e5b9ba/32.png) [@ChrisHae](https://forum.phoscon.de/u/ChrisHae)\
**Post date:** [June 20, 2024, 7:44am UTC](https://forum.phoscon.de/t/motions-sensors-turning-on-randomly/4927/5 "2024-06-20T07:44:47Z")

</div>

I stumbled over this interestin post somewhere else:

 ![image](https://forum.phoscon.de/uploads/default/original/2X/5/5d4996373567011e77cfd0e6663ab1961acedd1b.png)

So I would suggest first changing the battery.  
I am not sure if there is a newer firmware that could also reduce those problems.
