# Halt app on Home Assitant complement

**URL:** <https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826>\
**Category:** General Support\
**Created:** [April 3, 2026, 7:36am UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826 "2026-04-03T07:36:08Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![mhut](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mhut/32/5603_2.png) [@mhut](https://forum.phoscon.de/u/mhut)\
**Post date:** [April 3, 2026, 7:36am UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/1 "2026-04-03T07:36:08Z")

</div>

Hi.  
I have a Conbee II usb into a Raspberry Pi 3 running Home Assistant OS. Its plugged through an extension usb cable as recommended  
Deconz complement and integration installed and working all Ok (i have this setup since 2019).  
Suddenly, all the devices linked to the Conbee sttoped working. I’ve not updated nor touched anything. I have disabled automatic updates for the complements and also for the OS itself since many months ago.  
Looking the Deconz complement addon i can see its stopped everytime this happens. Checking the app logs i can see there’s a problem that says “Halt app”, then sometimes the complement restarts itself (as enabled in the settings) but sometimes it just stops and is no longer starting until i do it manually. In both cases thats so annoying, because i loose the funcionality while reatarting or ill loose it until i interact.

I’m not able to see whats causing this, my knowledge its not enough, but until now I’ve tried:

Uninstall and reinstall the complement, and the HA integration.  
Update the complement to the last version.  
Reset the Conbee.  
Change USB port.  
Change Zigbee channel.

None of that is solving the problem.

Here’s a piece of the log:  
deCONZ  
09:05:33:172 sd-card cid: 035344534836344780ffffffff0161bb  
09:05:34:008 DB sqlite version 3.42.0  
09:05:34:014 DB PRAGMA page\_count: 64  
09:05:34:014 DB PRAGMA page\_size: 4096  
09:05:34:014 DB PRAGMA freelist\_count: 0  
09:05:34:014 DB file size 262144 bytes, free pages 0  
09:05:34:014 DB PRAGMA user\_version: 10  
09:05:34:014 DB cleanup  
09:05:34:024 DB create temporary views  
09:05:37:289 DB skip loading sensor Puerta principal 43, handled by DDF Open/close sensor (MCCGQ01LM)  
09:05:37:293 DB skip loading sensor Sensor dormitorio 39, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:294 DB skip loading sensor Puerta baño 28, handled by DDF Open/close sensor (MCCGQ11LM)  
09:05:37:295 DB skip loading sensor Sensor pasillo 5, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:296 DB skip loading sensor Sensor vestidor 36, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:297 DB skip loading sensor lumi.sensor\_motion.aq2 29, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:297 DB skip loading sensor Sensor salon A 31, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:298 DB skip loading sensor Sensor baño 7, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:299 DB skip loading sensor Sensor habitacion F 24, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:299 DB skip loading sensor Sensor dormitorio 38, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:300 DB skip loading sensor Sensor vestidor 37, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:301 DB skip loading sensor Sensor habitacion F 25, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:301 DB skip loading sensor Sensor pasillo 6, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:311 DB skip loading sensor Sensor baño 8, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:311 DB skip loading sensor Sensor salon A 32, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:312 DB skip loading sensor Sensor cocina 30, handled by DDF Motion sensor (RTCGQ11LM)  
09:05:37:347 [INFO] - Timezone read is ‘Etc/UTC’  
09:05:37:348 [INFO] - Environment variable TZ found: Europe/Madrid…  
09:05:37:449 Started websocket server on 0.0.0.0, port: 8081  
09:05:37:485 [INFO] - Found file containing button maps. Parsing data…  
09:05:37:549 [INFO] - Button maps loaded.  
09:05:37:579 found node plugin: /usr/share/deCONZ/plugins/libde\_rest\_plugin.so - REST API Plugin  
09:05:37:755 found node plugin: /usr/share/deCONZ/plugins/libstd\_otau\_plugin.so - STD OTAU Plugin  
09:05:38:405 LightNode 1: Configuration tool 1 added  
09:05:39:175 COM: /dev/serial/by-id/usb-dresden\_elektronik\_ingenieurtechnik\_GmbH\_ConBee\_II\_DE2427219-if00 / serialno: DE2427219, ConBee II  
09:05:39:769 dlg action: Read binding table  
09:05:39:838 DEV found DDF for 0x00158D0006330AE1, path: /usr/share/deCONZ/devices/xiaomi/xiaomi\_mccgq01lm\_openclose\_sensor.json, result: 1  
09:05:39:847 DEV found DDF for 0x00158D000839B896, path: /usr/share/deCONZ/devices/xiaomi/xiaomi\_rtcgqq11lm\_presence\_sensor.json, result: 1  
09:05:39:849 DEV found DDF for 0x00158D0007C57FC1, path: /usr/share/deCONZ/devices/xiaomi/xiaomi\_mccgq11lm\_openclose\_sensor.json, result: 1  
09:05:39:854 DEV found DDF for 0x00158D00057B3EF6, path: /usr/share/deCONZ/devices/xiaomi/xiaomi\_rtcgqq11lm\_presence\_sensor.json, result: 1  
09:05:39:861 DEV [09:05:42] WARNING: Existing API key invalid (HTTP 404), will try to create a new one…  
[09:05:42] WARNING: No API key found – trying to create a new one…  
[09:05:53] INFO: API key successfully created after 1 seconds.  
[09:06:33] INFO: Successfully sent discovery information to Home Assistant.  
[07:07:25] INFO: Service restart after closing  
[09:07:31] INFO: Starting VNC server (local - yes)…  
[07:07:34] WARNING: Halt app  
s6-rc: info: service legacy-services: stopping  
2026/04/03 09:07:34 [notice] 147#147: signal 15 (SIGTERM) received from 144, exiting  
2026/04/03 09:07:34 [notice] 455#455: exiting  
2026/04/03 09:07:34 [notice] 455#455: exit

Its someone able to put some light into this trouble ?

---

<div class="post-metadata">

**Author:** ![mattreim](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mattreim/32/5482_2.png) [@mattreim](https://forum.phoscon.de/u/mattreim)\
**Post date:** [April 3, 2026, 10:27am UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/2 "2026-04-03T10:27:11Z")

</div>

Sorry, but it looks like the app and integration need to be reinstalled (remember to back up your Phoscon data). See [here](https://forum.phoscon.de/t/no-sensor-value-updates-after-deconz-update/6811).

---

<div class="post-metadata">

**Author:** ![mhut](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mhut/32/5603_2.png) [@mhut](https://forum.phoscon.de/u/mhut)\
**Post date:** [April 3, 2026, 10:34am UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/3 "2026-04-03T10:34:52Z")

</div>

I’ve done that, posted in the OP.  
Works for a few hours, then suddenly go back to the same issue.

---

<div class="post-metadata">

**Author:** ![mattreim](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mattreim/32/5482_2.png) [@mattreim](https://forum.phoscon.de/u/mattreim)\
**Post date:** [April 3, 2026, 11:24am UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/4 "2026-04-03T11:24:22Z")

</div>

First, you should not change the Zigbee channel because some devices do not automatically adjust the channel and may need to be reconnected.  
To find the actual problem, you should change the log levels to document the error.

---

<div class="post-metadata">

**Author:** ![mhut](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mhut/32/5603_2.png) [@mhut](https://forum.phoscon.de/u/mhut)\
**Post date:** [April 3, 2026, 12:22pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/5 "2026-04-03T12:22:37Z")

</div>

I’ve changed channel just to test and try. All my devices are working correctly no mather what channel i use, but thats not the problem.  
I can’t see any option to change the log level on the deconz complement.  
Or you’re meaning on the HA system ?

---

<div class="post-metadata">

**Author:** ![mattreim](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mattreim/32/5482_2.png) [@mattreim](https://forum.phoscon.de/u/mattreim)\
**Post date:** [April 3, 2026, 1:06pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/6 "2026-04-03T13:06:20Z")

</div>

See the app documentation.

---

<div class="post-metadata">

**Author:** ![mhut](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mhut/32/5603_2.png) [@mhut](https://forum.phoscon.de/u/mhut)\
**Post date:** [April 3, 2026, 1:43pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/7 "2026-04-03T13:43:34Z")

</div>

I suppose its dbg\_error but…can you please point wich one of this i must enable ?

dbg\_info  
dbg\_aps  
dbg\_zcl  
dbg\_zdp  
dbg\_ddf  
dbg\_dev  
dbg\_ota  
dbg\_error  
dbg\_http

Thanks for your time and patience.

---

<div class="post-metadata">

**Author:** ![mattreim](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mattreim/32/5482_2.png) [@mattreim](https://forum.phoscon.de/u/mattreim)\
**Post date:** [April 3, 2026, 2:11pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/8 "2026-04-03T14:11:46Z")

</div>

I would start with `dbg_error` and `dbg_http`. If a restart then occurs, the messages before that are of interest.

---

<div class="post-metadata">

**Author:** ![Smanar](https://forum.phoscon.de/user_avatar/forum.phoscon.de/smanar/32/60_2.png) [@Smanar](https://forum.phoscon.de/u/Smanar)\
**Post date:** [April 3, 2026, 3:24pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/9 "2026-04-03T15:24:09Z")

</div>

Hello, wich one deconz version are you using ?  
As the bug is rapid, try to install deconz on another machine and move the conbee (and migrate the database).  
You can configure HA to use this second installation, but this will help to see if the problem is from the deconz version, your database, or the host.

---

<div class="post-metadata">

**Author:** ![mhut](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mhut/32/5603_2.png) [@mhut](https://forum.phoscon.de/u/mhut)\
**Post date:** [April 3, 2026, 3:49pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/10 "2026-04-03T15:49:28Z")

</div>

Enabled, waiting for the next halt issue.

---

<div class="post-metadata">

**Author:** ![mhut](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mhut/32/5603_2.png) [@mhut](https://forum.phoscon.de/u/mhut)\
**Post date:** [April 3, 2026, 3:51pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/11 "2026-04-03T15:51:57Z")

</div>

Right now, using the last available deconz version. But was happening also on earlier version.  
I dont have any other resources on to install HA to try your way.

---

<div class="post-metadata">

**Author:** ![mattreim](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mattreim/32/5482_2.png) [@mattreim](https://forum.phoscon.de/u/mattreim)\
**Post date:** [April 3, 2026, 4:26pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/12 "2026-04-03T16:26:25Z")

</div>

@Smanar Excellent point.  
You don’t need HA; deCONZ can be installed and run on many systems (e.g., Windows, Linux, and macOS). So if it happens again, you should also rule out the database. The [Phoscon homepage](https://phoscon.de/en/conbee2/install) and Google can help you with that.

---

<div class="post-metadata">

**Author:** ![mhut](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mhut/32/5603_2.png) [@mhut](https://forum.phoscon.de/u/mhut)\
**Post date:** [April 4, 2026, 5:24pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/13 "2026-04-04T17:24:10Z")

</div>

Sadly, i dont have any other machines than my phone and a very old tablet.  
Also, after enabled dbg\_error and dbg\_http i can’t see any different or related messages on the log, just the same/similar posted on the OP.  
@Smanar wich database are you meaning, the deconz one or the HA ? If its Deconz, it is not recreated when i uninstall and delete the complement and the integration ?

---

<div class="post-metadata">

**Author:** ![Smanar](https://forum.phoscon.de/user_avatar/forum.phoscon.de/smanar/32/60_2.png) [@Smanar](https://forum.phoscon.de/u/Smanar)\
**Post date:** [April 4, 2026, 6:13pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/14 "2026-04-04T18:13:43Z")

</div>

I mean the deconz zigbee network setting, you can create and load backup using Phoscon.

> [@mhut](#):
>
> If its Deconz, it is not recreated when i uninstall and delete the complement and the integration ?

Only the device database can be removed, if you are able to see your devices in deconz, the answer is no.

> [@mhut](#):
>
> Right now, using the last available deconz version. But was happening also on earlier version.

Yeah, I m asking that because last version can have this kind of issue.

Try with loading deconz with command line, to have only deconz log and not HA ones.

Because " signal 15 (SIGTERM) received from 144, exiting" ca, be lot of thing, can be just another app that kill deconz.

---

<div class="post-metadata">

**Author:** ![mattreim](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mattreim/32/5482_2.png) [@mattreim](https://forum.phoscon.de/u/mattreim)\
**Post date:** [April 5, 2026, 11:08pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/15 "2026-04-05T23:08:48Z")

</div>

It’s strange, since I’m happy with the current HA version. You should try making a Phoscon backup and restoring it with a brand new version from the app store. It’s worth a try.

---

<div class="post-metadata">

**Author:** ![mhut](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mhut/32/5603_2.png) [@mhut](https://forum.phoscon.de/u/mhut)\
**Post date:** [April 6, 2026, 10:17am UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/16 "2026-04-06T10:17:05Z")

</div>

Brand new version of HA SO, or Deconz app…?  
Because if its Deconz I’ve already do that many times… with no positive results, the whole thing works for maybe 24 hours or so, and then back again the dame behavior. I saw on the logs that even its halted when is simply restarting the complement.

I’d like to add i really appreciate all your help and patience. Also, im sorry for somet hings i do not understand or be able to do.

---

<div class="post-metadata">

**Author:** ![Smanar](https://forum.phoscon.de/user_avatar/forum.phoscon.de/smanar/32/60_2.png) [@Smanar](https://forum.phoscon.de/u/Smanar)\
**Post date:** [April 6, 2026, 7:03pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/17 "2026-04-06T19:03:18Z")

</div>

I don’t have issue too on my side.  
But there is at least [V2.32.5: deconz.service: Main process exited, code=killed, status=11/SEGV](https://forum.phoscon.de/t/v2-32-5-deconz-service-main-process-exited-code-killed-status-11-segv/6770)

Have you tried with older deconz versions ?

Try to run deconz with command line, to have direct logs, no the ones from HA.

---

<div class="post-metadata">

**Author:** ![mhut](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mhut/32/5603_2.png) [@mhut](https://forum.phoscon.de/u/mhut)\
**Post date:** [April 6, 2026, 9:16pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/18 "2026-04-06T21:16:48Z")

</div>

Issue start happened on a older version of deconz, i was non updating anything because all was runnign fine for my needs.  
I’ve tried at least two HA backups, wich are including earlier versions of deconz, but the issue persists, so i can’t understand where the problem begins.  
I dont know how to run deconz from command line and make it work on HA, my abilities are limited.

---

<div class="post-metadata">

**Author:** ![mattreim](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mattreim/32/5482_2.png) [@mattreim](https://forum.phoscon.de/u/mattreim)\
**Post date:** [April 6, 2026, 10:57pm UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/19 "2026-04-06T22:57:41Z")

</div>

For HA problems, the `ha supervisor repair` function, for example from the Advanced SSH & Web Terminal app in the App Store, can help. Alternatively, you can try disabling the watchdog function on the app’s info page.

---

<div class="post-metadata">

**Author:** ![mhut](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mhut/32/5603_2.png) [@mhut](https://forum.phoscon.de/u/mhut)\
**Post date:** [April 7, 2026, 10:13am UTC](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826/20 "2026-04-07T10:13:52Z")

</div>

Tried both things a week ago or so. No luck.

[Next page](https://forum.phoscon.de/t/halt-app-on-home-assitant-complement/6826.md?page=2)
