# Exchange of conbee II

**URL:** <https://forum.phoscon.de/t/exchange-of-conbee-ii/4077>\
**Category:** Setup Support\
**Created:** [October 20, 2023, 12:28pm UTC](https://forum.phoscon.de/t/exchange-of-conbee-ii/4077 "2023-10-20T12:28:11Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![fdrive](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/f/5fc32e/32.png) [@fdrive](https://forum.phoscon.de/u/fdrive)\
**Post date:** [October 20, 2023, 12:28pm UTC](https://forum.phoscon.de/t/exchange-of-conbee-ii/4077/1 "2023-10-20T12:28:11Z")

</div>

Hey,

since I wasn`t able to solve a problem with my conbee II stick (https://forum.phoscon.de/t/deconz-service-pauses-occasionally/4036/7), my only hope is/was that it`s a hardware error, so I got a new conbee II stick.

So I unplugged the old, plugged in the new conbee II and rebooted. Everything works as expected and all paired devices are still in the phoscon app, but nothing responds. E.g. I switch a light in the phoscon app and the light shows as on/off within the app, but the light never switches in the real world.

I have quite a lot of zigbee devices paired, do I need to pair them all again or is there anything else to do when changing the conbee II stick?

Thanks for any hints.

---

<div class="post-metadata">

**Author:** ![Smanar](https://forum.phoscon.de/user_avatar/forum.phoscon.de/smanar/32/60_2.png) [@Smanar](https://forum.phoscon.de/u/Smanar)\
**Post date:** [October 20, 2023, 5:15pm UTC](https://forum.phoscon.de/t/exchange-of-conbee-ii/4077/2 "2023-10-20T17:15:46Z")

</div>

Hello, use the old conbee, make a backup (of the zigbee network) using phoscon, and restore it with the new conbee.  
The network configuration is stored on the gateway (and the device database on the host)

---

<div class="post-metadata">

**Author:** ![fdrive](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/f/5fc32e/32.png) [@fdrive](https://forum.phoscon.de/u/fdrive)\
**Post date:** [October 20, 2023, 6:44pm UTC](https://forum.phoscon.de/t/exchange-of-conbee-ii/4077/3 "2023-10-20T18:44:36Z")

</div>

did a backup at the old stick and successfully restored on the new one. the devices in the phoscon app unfortunately stays unresponsiv.

---

<div class="post-metadata">

**Author:** ![Mimiix](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mimiix/32/10_2.png) [@Mimiix](https://forum.phoscon.de/u/Mimiix)\
**Post date:** [October 21, 2023, 6:51am UTC](https://forum.phoscon.de/t/exchange-of-conbee-ii/4077/4 "2023-10-21T06:51:34Z")

</div>

Powercycle the devices while searching for the devices

---

<div class="post-metadata">

**Author:** ![Smanar](https://forum.phoscon.de/user_avatar/forum.phoscon.de/smanar/32/60_2.png) [@Smanar](https://forum.phoscon.de/u/Smanar)\
**Post date:** [October 21, 2023, 7:20am UTC](https://forum.phoscon.de/t/exchange-of-conbee-ii/4077/5 "2023-10-21T07:20:18Z")

</div>

And other think, somes sensors like aqara/xiaomi don’t like to be without parent for a long time, they can leave the network.
