# Debain 13 und deconz **URL:** \ **Category:** Dresden-Elektronik Hardware\ **Created:** [October 11, 2025, 5:34pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568 "2025-10-11T17:34:01Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![Toster84](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/t/cab0a1/32.png) [@Toster84](https://forum.phoscon.de/u/Toster84)\ **Post date:** [October 11, 2025, 5:34pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/1 "2025-10-11T17:34:01Z")
Guten Tag Ich hab heute ein Update von Debian 12 auf Debain 13 Trixie gemacht. Leider Funtioniert mein DeconZ und Phoscon app und mein Fhem nicht mehr miteinander. In Fhem gibt es keine Verbindung. Kann es sein das debain 13 nicht kompatibel sind. Hab jetzt erstmal wieder die Sicherung wiederhergestellt mit Debain 12 und da läuft alles. Hat jemand schon Erfahrungen mit dem Update auf Debain 13 Trixie? ---
**Author:** ![dvbcheck](https://forum.phoscon.de/user_avatar/forum.phoscon.de/dvbcheck/32/4238_2.png) [@dvbcheck](https://forum.phoscon.de/u/dvbcheck)\ **Post date:** [October 12, 2025, 7:10am UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/2 "2025-10-12T07:10:27Z")
Update per ssh auf laufendem Bookworm oder neuen Stick/SD Card mit frisch geflashtem Trixie sowie manueller Installation von deCONZ? Ich traue mich noch nicht, da es noch kein passende HomeBridge Image basierend auf Trixie gibt. Update via ssh on running Bookworm or new stick/SD card with freshly flashed Trixie as well as manual installation of deCONZ? I don’t dare yet, because there is no matching HomeBridge image based on Trixie yet. ---
**Author:** ![Mimiix](https://forum.phoscon.de/user_avatar/forum.phoscon.de/mimiix/32/10_2.png) [@Mimiix](https://forum.phoscon.de/u/Mimiix)\ **Post date:** [October 12, 2025, 9:43am UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/3 "2025-10-12T09:43:16Z")
Please post in English guys, we are an English community. ---
**Author:** ![ChrisKegel2901](https://forum.phoscon.de/user_avatar/forum.phoscon.de/chriskegel2901/32/5422_2.png) [@ChrisKegel2901](https://forum.phoscon.de/u/ChrisKegel2901)\ **Post date:** [October 16, 2025, 4:21pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/4 "2025-10-16T16:21:58Z")
I have the Same issue. Upgraded my Debian 12 based Raspberry Pi OS to the new debian 13 one. Result: deconz cant be installed anymore as the Qt5 dependencies cannot be satisfied. ```auto Solving dependencies... Error! Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: Unsatisfied dependencies: deconz : Depends: libqt5core5a but it is not installable Depends: libqt5network5 but it is not installable Depends: libqt5widgets5 but it is not installable Depends: libqt5gui5 but it is not installable Depends: libqt5sql5 but it is not installable Error: Unable to correct problems, you have held broken packages. Error: The following information from --solver 3.0 may provide additional context: Unable to satisfy dependencies. Reached two conflicting decisions: 1. deconz:armhf=2.31.2-beta is selected for install 2. deconz:armhf Depends libqt5core5a but none of the choices are installable ``` Edit: I also tried the non-beta deconz Version with the same result. ---
**Author:** ![Siggi](https://forum.phoscon.de/user_avatar/forum.phoscon.de/siggi/32/2525_2.png) [@Siggi](https://forum.phoscon.de/u/Siggi)\ **Post date:** [October 19, 2025, 9:53am UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/5 "2025-10-19T09:53:18Z")
@Mimiix [@Developer](https://forum.phoscon.de/groups/developer) [@de\_employees](https://forum.phoscon.de/groups/de_employees) That means, waiting with upgrade till this bug with QT5 is fixed? ---
**Author:** ![keinstein](https://forum.phoscon.de/user_avatar/forum.phoscon.de/keinstein/32/5416_2.png) [@keinstein](https://forum.phoscon.de/u/keinstein)\ **Post date:** [October 27, 2025, 10:57pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/6 "2025-10-27T22:57:26Z")
Debian 13.1/Raspbian on Raspberry PI (upgraded from Debian 12/Raspbian): deCONZ works. Dependencies of deCONZ and installed packages (copied from aptitude): –\ Hängt ab von (12) –\ curl i 8.14.1-2 p curl:armhf 8.14.1-2 –\ libcap2-bin i 1:2.75-10+b1 p libcap2-bin:armhf 1:2.75-10+b1 –\ libqt5core5a c 5.15.8+dfsg-11+deb12u3 i A libqt5core5t64 5.15.15+dfsg-6 –\ libqt5gui5 c 5.15.8+dfsg-11+deb12u3 i A libqt5gui5t64 5.15.15+dfsg-6 –\ libqt5network5 i A libqt5network5t64 5.15.15+dfsg-6 –\ libqt5qml5 i A 5.15.15+dfsg-3 –\ libqt5serialport5 i A 5.15.15-2 –\ libqt5sql5 i A libqt5sql5t64 5.15.15+dfsg-6 –\ libqt5websockets5 i A 5.15.15-2 –\ libqt5widgets5 i A libqt5widgets5t64 5.15.15+dfsg-6 –\ lsof i 4.99.4+dfsg-2 –\ sqlite3 i A 3.46.1-7 p sqlite3:armhf 3.46.1-7 –\ Schlägt vor (1) — udev –\ Kollidiert mit (1) — deconz — Pakete, die von deconz abhängen (1) –\ Versionen von deconz (1) i 2.31.2 ---
**Author:** ![ChrisKegel2901](https://forum.phoscon.de/user_avatar/forum.phoscon.de/chriskegel2901/32/5422_2.png) [@ChrisKegel2901](https://forum.phoscon.de/u/ChrisKegel2901)\ **Post date:** [November 7, 2025, 7:11pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/7 "2025-11-07T19:11:40Z")
Did you install deconz after upgrading to Trixie or was it still installed from your Bookworm deployment? I‘ve checked the Trixie repos and the libqt5\* packages are not available. The version Numbers from your aptitude excerpt above also show that those are Bookworm packages. As its also not officially supported by deconz currently, it cant be installed on Trixie as of now imho. ---
**Author:** ![Toster84](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/t/cab0a1/32.png) [@Toster84](https://forum.phoscon.de/u/Toster84)\ **Post date:** [November 8, 2025, 9:50am UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/8 "2025-11-08T09:50:39Z")
I upgraded from Debian 12 to Debian 13. The DeconZ files were apparently not updated, probably because the key is in an old file. [http://phoscon.de/apt/deconz/dists/bullseye/InRelease:](http://phoscon.de/apt/deconz/dists/bullseye/InRelease:) The key is stored in the deprecated keyring trusted.gpg (/etc/apt/trusted.gpg), see the DISCOURAGE section in apt-key(8) for details. > **[(gelöst) Update 11 auf 12 mit Problemen - debianforum.de](https://debianforum.de/forum/viewtopic.php?t=187175)** ---
**Author:** ![manup](https://forum.phoscon.de/user_avatar/forum.phoscon.de/manup/32/9_2.png) [@manup](https://forum.phoscon.de/u/manup)\ **Post date:** [November 10, 2025, 7:35pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/9 "2025-11-10T19:35:40Z")
Hi everyone I’ve spend the last week to debug and get deCONZ working under Trixie. As it turns out, somehow Qt5 support is dropped at least in the 32-bit version. The upcoming deCONZ version does contain an initial Qt6 port for Linux for amd64/arm64 and armhf. To still support older Linux distributions this is a new deCONZ package with the name `deconz-qt6`, so after release this can be installed via `sudo apt install deconz-qt6`. This should also work better with the Wayland compositor. ---
**Author:** ![Toster84](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/t/cab0a1/32.png) [@Toster84](https://forum.phoscon.de/u/Toster84)\ **Post date:** [November 14, 2025, 3:52pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/10 "2025-11-14T15:52:21Z")
Can I then install `sudo apt install deconz-qt6` and then update Debian 13? Will DeconZ then work on Trixi? ---
**Author:** ![manup](https://forum.phoscon.de/user_avatar/forum.phoscon.de/manup/32/9_2.png) [@manup](https://forum.phoscon.de/u/manup)\ **Post date:** [November 14, 2025, 4:21pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/11 "2025-11-14T16:21:13Z")
If you are on a distribution which does have the qt6 packages (since Bookworm) yes this should work. ---
**Author:** ![ChrisKegel2901](https://forum.phoscon.de/user_avatar/forum.phoscon.de/chriskegel2901/32/5422_2.png) [@ChrisKegel2901](https://forum.phoscon.de/u/ChrisKegel2901)\ **Post date:** [November 14, 2025, 5:16pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/12 "2025-11-14T17:16:43Z")
I‘ve just tried it - it works perfectly with the most recent Beta Build! Thank you very much! ---
**Author:** ![Toster84](https://forum.phoscon.de/letter_avatar_proxy/v4/letter/t/cab0a1/32.png) [@Toster84](https://forum.phoscon.de/u/Toster84)\ **Post date:** [November 15, 2025, 2:27pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/13 "2025-11-15T14:27:44Z")
It worked for me with the beta version now too. I’m only getting this message when updating: Warning: [http://archive.raspberrypi.org/debian/dists/bullseye/InRelease:](http://archive.raspberrypi.org/debian/dists/bullseye/InRelease:) Policy will reject signature within a year, see --audit for details Note: Missing Signed-By entry in sources.list(5) for »[http://phoscon.de/apt/deconz«](http://phoscon.de/apt/deconz%C2%AB) Note: Missing Signed-By entry in sources.list(5) for »[http://archive.raspberrypi.org/debian«](http://archive.raspberrypi.org/debian%C2%AB) ---
**Author:** ![unf](https://forum.phoscon.de/user_avatar/forum.phoscon.de/unf/32/4130_2.png) [@unf](https://forum.phoscon.de/u/unf)\ **Post date:** [November 18, 2025, 4:50pm UTC](https://forum.phoscon.de/t/debain-13-und-deconz/6568/14 "2025-11-18T16:50:43Z")
Hi there, my Phoscon appliance is the last one remaining on Bookworm. So, I am interested also on upgrading to Trixie, meanwhile running based on a RPi3. In Raspberry OS (Trixie) they made some things modular, e.g. Wayland resp. Xorg kind of chooseable modules. Last time upgrading from Bullseye I ended up in some trouble, as Wayland wasn’t properly working on the RPi2 back then. Finally I changed to Xorg instead Wayland to make deConz working again. Anyone stumbled over issues with Wayland resp. Xorg while doing dist-upgrade to Trixie?