# Blitzwolf BW-SHP15 shows kWh but not W

**URL:** <https://forum.phoscon.de/t/blitzwolf-bw-shp15-shows-kwh-but-not-w/4396>\
**Category:** General Support\
**Created:** [January 3, 2024, 3:34pm UTC](https://forum.phoscon.de/t/blitzwolf-bw-shp15-shows-kwh-but-not-w/4396 "2024-01-03T15:34:10Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![philipp089](https://forum.phoscon.de/user_avatar/forum.phoscon.de/philipp089/32/400_2.png) [@philipp089](https://forum.phoscon.de/u/philipp089)\
**Post date:** [January 6, 2024, 3:58am UTC](https://forum.phoscon.de/t/blitzwolf-bw-shp15-shows-kwh-but-not-w/4396/4 "2024-01-06T03:58:32Z")

</div>

Hi Dennis,

thats funny, as i really searched the forums for fitting plugs and came to this post:

> [@Blitzwolf BW-SHP15](https://forum.phoscon.de/t/blitzwolf-bw-shp15/221/37):
>
> Hi, I just bought SHP-15. It has the new firmware (version 69) and identifies itself as \_TZ3000\_u5u4cakc. I have deCONZ 2.17.1. On the first try, the plug was paired instantly via Phoscon, but the power sensors never appeard in Home assistant. I tried re-adding the sensor few times, but with no luck. Then I tried the DDF “workarounds” above through Deconz (Panel \> Control, then switching DDF settings) and was removing and re-adding the plug. The Silver/Broze settings made no difference. Then I …

Who could have known that the same plug could behave differently in two home assistant setups with deCONZ 😛

My setup shows the sensors by now (did a lot of repairing and deleting), but the current consumption (Wattage) does not update in realtime, it updates in five minute intervals, which differs from the upper post. There is no way to change the update interval or is it?

Cheers,  
Philipp

---

_[View the full topic](https://forum.phoscon.de/t/blitzwolf-bw-shp15-shows-kwh-but-not-w/4396)._