opened 05:47PM - 16 Aug 22 UTC
Device Request
<!--
!!!!! READ THIS FIRST: https://forum.phoscon.de/t/read-me-device-request…-read-me/23/2 !!!!!!
- Before requesting a device, please make sure to search the open and closed issues for any requests in the past.
- Make sure not to remove any headers and fill the template completely. If you remove the headers, the issue will be auto-closed.
- Sometimes devices have been requested before but are not implemented yet due to various reasons.
- If there are no hits for your device, please proceed.
- If you're unsure whether device support was already requested, please ask for advise in our Discord chat: https://discord.gg/QFhTxqN
-->
## Device
- Product name: ZIGBEE THERMOSTAT (Beok TGR85B clone)
- Manufacturer: _TZE200_2ekuz3dz
- Model identifier: TS0601
- Device type :
- Thermostat
This seems to be a clone of Beok TGR85B-ZB, it came with no branding and manual says only "Zigbee THERMOSTAT USER GUIDE".
It looks like this one: https://zigbee.blakadder.com/Beok_TGR85-ZB.html, seems to be added to z2m already at https://github.com/Koenkk/zigbee2mqtt/issues/12849 (and my device looks exactly like the one linked in here), should be supported by zigpy with https://github.com/zigpy/zha-device-handlers/pull/1507/commits.
So far my device was able to only join the network. It did flip the time by 5hr upon joining. And somehow ended up with time being set as 25:13 (:roll_eyes:).
Edit: Tested it with zigbee2mqtt, detected as [Tuya X5H-GB-B](https://www.zigbee2mqtt.io/devices/X5H-GB-B.html#tuya-x5h-gb-b), seems all functions are operating correctly on z2m.
<!--
Please refer to https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Request-Device-Support
on how the Basic Cluster attributes are obtained.
-->
## Screenshots
<!--
Screenshots help to identify the device and its capabilities. Please refer to:
https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Request-Device-Support
for examples of the required screenshots.
Required screenshots:
- Endpoints and clusters of the node
- Node Info panel
In the Cluster Info panel press "read" button to retreive the values. Please note that at least "Manufacturer Name" and "Model Identifier" must be populated with data (therefore, must not be empty), otherwise that information will not be usable. For battery powered devices, after pressing read it is required to wake-up the device by pressing a button or any other means of interaction.
-->
<!--
If available add screenshots of other clusters. Please Remove sections that are not available on your device.
Relevant clusters are: Simple Metering, Electrical Measurement, Power Configuration, Thermostat, etc. You can typically spare Identify, Alarms, Device Temperature, On/Off. Please ensure data has been read prior to taking any screenshots.
-->
### Basic
### Groups
### Scenes
