# Latest **URL:** https://forum.phoscon.de/latest.md [Latest](https://forum.phoscon.de/latest.md) · [Categories](https://forum.phoscon.de/categories.md) --- ## [Switches don‘t work](https://forum.phoscon.de/t/switches-don-t-work/6966)
**Author:** [@tobster](https://forum.phoscon.de/u/tobster)\ **Replies:** 4\ **Last updated:** [November 10, 2026, 4:12pm UTC](https://forum.phoscon.de/t/switches-don-t-work/6966 "2026-11-10T16:12:15Z")
Hi everyone, since yesterday, none of my switches have been turning on the lights. In the web interface, the light turns on, but in reality, nothing happens. The motion detectors turn on the light after three or four min… --- ## [New device not connected](https://forum.phoscon.de/t/new-device-not-connected/6475)
**Author:** [@detsky](https://forum.phoscon.de/u/detsky)\ **Replies:** 16\ **Last updated:** [November 9, 2026, 4:57pm UTC](https://forum.phoscon.de/t/new-device-not-connected/6475 "2026-11-09T16:57:12Z")
I’ve got two new devices “Nedis Smart Radiator Thermostat, powered by tuya, ZBHTR20WT”. deconz does not recognize them. Is there any chance to get them running? --- ## [DDF help: Shelly BLU TRV (SBTR-001AEU)](https://forum.phoscon.de/t/ddf-help-shelly-blu-trv-sbtr-001aeu/6961)
**Author:** [@Luuser](https://forum.phoscon.de/u/Luuser)\ **Replies:** 3\ **Last updated:** [November 9, 2026, 4:48pm UTC](https://forum.phoscon.de/t/ddf-help-shelly-blu-trv-sbtr-001aeu/6961 "2026-11-09T16:48:38Z")
Hi, I would like to get the Shelly BLU TRV (SBTR-001AEU) working properly with deCONZ. I have very little experience with creating DDFs myself, so I would appreciate help with this or an existing DDF if someone has alre… --- ## [Changing the channel Deconz Conbee 3](https://forum.phoscon.de/t/changing-the-channel-deconz-conbee-3/6963)
**Author:** [@andys73](https://forum.phoscon.de/u/andys73)\ **Replies:** 2\ **Last updated:** [November 8, 2026, 9:56am UTC](https://forum.phoscon.de/t/changing-the-channel-deconz-conbee-3/6963 "2026-11-08T09:56:33Z")
Hello, I need to change the channel in Deconz from 25 to 11 or 15 to avoid a network issue on my neighbors side. I remember years ago I have changed the channel and I only had to repair the sensors. I really hope this … --- ## [Deconz headless service code=exited, status=1/FAILURE](https://forum.phoscon.de/t/deconz-headless-service-code-exited-status-1-failure/6959)
**Author:** [@BiberM](https://forum.phoscon.de/u/BiberM)\ **Replies:** 1\ **Last updated:** [November 6, 2026, 6:51pm UTC](https://forum.phoscon.de/t/deconz-headless-service-code-exited-status-1-failure/6959 "2026-11-06T18:51:45Z")
Dear community, I am running a raspi 4B with raspian (based on debian trixie) with iobroker and deCONZ/phoscon in headless mode. Since a couple of days the deCONZ service keeps crashing a start and restarting. systemc… --- ## [Download: Tri-state DDF File for Shelly BLU Door/Window Mini ZB](https://forum.phoscon.de/t/download-tri-state-ddf-file-for-shelly-blu-door-window-mini-zb/6964)
**Author:** [@mf2105](https://forum.phoscon.de/u/mf2105)\ **Replies:** 0\ **Last updated:** [November 6, 2026, 10:04am UTC](https://forum.phoscon.de/t/download-tri-state-ddf-file-for-shelly-blu-door-window-mini-zb/6964 "2026-11-06T10:04:35Z")
I created a DDF file with ChatGPT for Shelly BLU Door/Window Mini ZB in Zigbee Mode. status: 0 = geschlossen, 1 = gekippt, 3 = geöffnet, −1 = noch keine Statusmeldung ausgewertet. (complete reset: hold button 30sec. in… --- ## [Set default txpower Conbee III](https://forum.phoscon.de/t/set-default-txpower-conbee-iii/6956)
**Author:** [@gab](https://forum.phoscon.de/u/gab)\ **Replies:** 1\ **Last updated:** [November 4, 2026, 9:59am UTC](https://forum.phoscon.de/t/set-default-txpower-conbee-iii/6956 "2026-11-04T09:59:05Z")
Hi, I want to increase the default transmission power of Conbee III running Thread firmware from 5 dBm to 10 dBm. Publishing the source modifications mentions here would also be helpful. --- ## [SONOFF TRV‑ZBT TRV Gen2 Zigbee Thermostat](https://forum.phoscon.de/t/sonoff-trv-zbt-trv-gen2-zigbee-thermostat/6958)
**Author:** [@Mini1954](https://forum.phoscon.de/u/Mini1954)\ **Replies:** 0\ **Last updated:** [October 29, 2026, 11:51am UTC](https://forum.phoscon.de/t/sonoff-trv-zbt-trv-gen2-zigbee-thermostat/6958 "2026-10-29T11:51:09Z")
Has anybody already tried to connect the new SONOFF TRV‑ZBT TRV Gen2 Zigbee Thermostat to conbee 2? --- ## [Subject: Critical OTA firmware mismatch – four Livarno RGBW GU10 bulbs converted into TS130F covering devices](https://forum.phoscon.de/t/subject-critical-ota-firmware-mismatch-four-livarno-rgbw-gu10-bulbs-converted-into-ts130f-covering-devices/6953)
**Author:** [@nexus767](https://forum.phoscon.de/u/nexus767)\ **Replies:** 6\ **Last updated:** [October 28, 2026, 2:52pm UTC](https://forum.phoscon.de/t/subject-critical-ota-firmware-mismatch-four-livarno-rgbw-gu10-bulbs-converted-into-ts130f-covering-devices/6953 "2026-10-28T14:52:46Z")
Hello, Using deCONZ 2.33.2 with ConBee II, four Lidl Livarno RGBW GU10 bulbs (HG07834A, \_TZ3000\_quqaeew6, originally TS0505B) became unusable after OTA updates. All four now identify as TS130F window-covering devices i… --- ## [Conbee III not recognized correctly in Proxmox VM (Ubuntu Server 26.04)](https://forum.phoscon.de/t/conbee-iii-not-recognized-correctly-in-proxmox-vm-ubuntu-server-26-04/6948)
**Author:** [@fschunke](https://forum.phoscon.de/u/fschunke)\ **Replies:** 2\ **Last updated:** [October 13, 2026, 6:24am UTC](https://forum.phoscon.de/t/conbee-iii-not-recognized-correctly-in-proxmox-vm-ubuntu-server-26-04/6948 "2026-10-13T06:24:30Z")
Hi, I try to setup a Conbee III in a Podman container on a Proxmox VM. The stick is recognized by the Datacenter and successfully connected to the VM and I can see it under lsusb on the VM The ID is 0403:6015… --- ## [Aqara Smart Plugs disappear after restart](https://forum.phoscon.de/t/aqara-smart-plugs-disappear-after-restart/6950)
**Author:** [@beangogreen](https://forum.phoscon.de/u/beangogreen)\ **Replies:** 1\ **Last updated:** [October 12, 2026, 4:14pm UTC](https://forum.phoscon.de/t/aqara-smart-plugs-disappear-after-restart/6950 "2026-10-12T16:14:38Z")
Hello everyone, Unfortunately, I’ve been dealing with the following annoying issue for quite some time now: I have several Aqara Smart Plugs in use. They work perfectly fine when I freshly pair them with DeCONZ / Phosc… --- ## [FLS-M Feature Request - Enhanced Support for Dual IC WS2811 RGBCCT LED Strips](https://forum.phoscon.de/t/fls-m-feature-request-enhanced-support-for-dual-ic-ws2811-rgbcct-led-strips/6771)
**Author:** [@chipxsd](https://forum.phoscon.de/u/chipxsd)\ **Replies:** 3\ **Last updated:** [October 6, 2026, 10:07am UTC](https://forum.phoscon.de/t/fls-m-feature-request-enhanced-support-for-dual-ic-ws2811-rgbcct-led-strips/6771 "2026-10-06T10:07:56Z")
I am using the FLS-M LED controller with a BTF-LIGHTING WS2811 Dual IC RGBCCT FCOB COB LED Strip (140 segments). The strip features an interleaved design, with odd ICs controlling RGB segments and even ICs managing WW (w… --- ## [Wing TS0201 variant](https://forum.phoscon.de/t/wing-ts0201-variant/6899)
**Author:** [@JulioVargas](https://forum.phoscon.de/u/JulioVargas)\ **Replies:** 6\ **Last updated:** [October 5, 2026, 8:29pm UTC](https://forum.phoscon.de/t/wing-ts0201-variant/6899 "2026-10-05T20:29:40Z")
Deconz 2.32.5 I guess this is yet another TS0201 variant. Box is labelled UZ-1T. I have it paired. I see Wing TS0201 is added here: so I have just dropped that in to /usr/share/deCONZ/devices/tuya/ on top of the ori… --- ## [FLS-M Integration Issues to Aqara M3 via Matter :-(](https://forum.phoscon.de/t/fls-m-integration-issues-to-aqara-m3-via-matter/6945)
**Author:** [@jsstevo](https://forum.phoscon.de/u/jsstevo)\ **Replies:** 0\ **Last updated:** [October 5, 2026, 7:14pm UTC](https://forum.phoscon.de/t/fls-m-integration-issues-to-aqara-m3-via-matter/6945 "2026-10-05T19:14:52Z")
Hi all, After seeing that the FLS-M integrates with Aqara via Matter, I went all in and purchased 4x FLS-M’s as I have a full Aqara lighting / switching system in my house. I then purchased addressable LED strips (WS28… --- ## [Proxmox LXC: deconz not connecting to ConBee II gateway](https://forum.phoscon.de/t/proxmox-lxc-deconz-not-connecting-to-conbee-ii-gateway/771)
**Author:** [@SmartHomeNewbie](https://forum.phoscon.de/u/SmartHomeNewbie)\ **Replies:** 14\ **Last updated:** [October 2, 2026, 7:12pm UTC](https://forum.phoscon.de/t/proxmox-lxc-deconz-not-connecting-to-conbee-ii-gateway/771 "2026-10-02T19:12:17Z")
Hi. Im trying to run deconz v2.13.01 in an LXC ubuntu 20.04 LTS container in proxmox, deconz starts and i can access it from browser but i cant seem to establish connection to my ConBee II. I have passed my ConBee thro… --- ## [Unsure about LQI / blue line in the network diagram](https://forum.phoscon.de/t/unsure-about-lqi-blue-line-in-the-network-diagram/6940)
**Author:** [@xrstf](https://forum.phoscon.de/u/xrstf)\ **Replies:** 2\ **Last updated:** [September 27, 2026, 3:12pm UTC](https://forum.phoscon.de/t/unsure-about-lqi-blue-line-in-the-network-diagram/6940 "2026-09-27T15:12:05Z")
I am trying to integrate an ESP32-C6 as a router into my new network (the device on top in the diagram below), but the signal quality seems not to be great. Regardless, I looked into the Source Routing options in deCONZ … --- ## [Pairing SONOFF SNZB-02B with ConBee III](https://forum.phoscon.de/t/pairing-sonoff-snzb-02b-with-conbee-iii/6939)
**Author:** [@xrstf](https://forum.phoscon.de/u/xrstf)\ **Replies:** 7\ **Last updated:** [September 25, 2026, 4:51pm UTC](https://forum.phoscon.de/t/pairing-sonoff-snzb-02b-with-conbee-iii/6939 "2026-09-25T16:51:05Z")
I am entirely new to Zigbee and have just bought the Conbee III as my coordinator (I plan on eventually using it on an OrangePi, for now am testing on Windows 10). I want to connect it eventually to self-made devices usi… --- ## [Suddenly no detection of any device - Conbee III - HA - ZHA - Docker](https://forum.phoscon.de/t/suddenly-no-detection-of-any-device-conbee-iii-ha-zha-docker/6934)
**Author:** [@Nomad](https://forum.phoscon.de/u/Nomad)\ **Replies:** 2\ **Last updated:** [September 23, 2026, 7:13am UTC](https://forum.phoscon.de/t/suddenly-no-detection-of-any-device-conbee-iii-ha-zha-docker/6934 "2026-09-23T07:13:00Z")
Good morning, Last night at 2:22, all Zigbee devices (Firmware: deCONZ\_ConBeeIII\_0x26550900.bin.GCF) suddenly became undiscoverable. Initially, this affected the directly powered devices like power plugs and lights, and… --- ## [FLS-M: Two Units No Longer Able to Power from VIN](https://forum.phoscon.de/t/fls-m-two-units-no-longer-able-to-power-from-vin/6661)
**Author:** [@Honusz](https://forum.phoscon.de/u/Honusz)\ **Replies:** 2\ **Last updated:** [September 17, 2026, 1:27pm UTC](https://forum.phoscon.de/t/fls-m-two-units-no-longer-able-to-power-from-vin/6661 "2026-09-17T13:27:19Z")
I have two FLS-M units purchased this past spring which are no longer able to power from VIN. Units power up if connected to computer via USB-C. I’m able to load firmware from, and flash to the device. No lights, or Zi… --- ## [Shelly 2PM Gen4 no power data](https://forum.phoscon.de/t/shelly-2pm-gen4-no-power-data/6932)
**Author:** [@Olli](https://forum.phoscon.de/u/Olli)\ **Replies:** 11\ **Last updated:** [September 15, 2026, 7:16pm UTC](https://forum.phoscon.de/t/shelly-2pm-gen4-no-power-data/6932 "2026-09-15T19:16:26Z")
Hi, i am using last stable Version 2.32.5. There is no still no power data displayed for shelly 2PM Gen4 See https://github.com/dresden-elektronik/deconz-rest-plugin/issues/8316 --- ## [Help . channel change.. dead network](https://forum.phoscon.de/t/help-channel-change-dead-network/6929)
**Author:** [@deconzrene](https://forum.phoscon.de/u/deconzrene)\ **Replies:** 2\ **Last updated:** [September 11, 2026, 7:10pm UTC](https://forum.phoscon.de/t/help-channel-change-dead-network/6929 "2026-09-11T19:10:28Z")
I tried changing the channel on my conbee3 (which operates via ZHA) from channel 11 to channel 25. Now everything is dead; I tried reverting to channel 11, but I can’t get the network back up and running. Is there anythi… --- ## [Phoscon FLS CT Ip - Change "StartUp OnOff" 0x4003 behaviour](https://forum.phoscon.de/t/phoscon-fls-ct-ip-change-startup-onoff-0x4003-behaviour/6931)
**Author:** [@blue-kaleidoscope](https://forum.phoscon.de/u/blue-kaleidoscope)\ **Replies:** 0\ **Last updated:** [September 11, 2026, 11:25am UTC](https://forum.phoscon.de/t/phoscon-fls-ct-ip-change-startup-onoff-0x4003-behaviour/6931 "2026-09-11T11:25:31Z")
Hi, I just commissioned a Phoscon LED controller and would like to change its power on behaviour. However, in deCONZ it is grayed out after pushing “read”. Is 0x4003not supported by the device? --- ## [Frient WISZB-137 integration](https://forum.phoscon.de/t/frient-wiszb-137-integration/6928)
**Author:** [@bwiedemann](https://forum.phoscon.de/u/bwiedemann)\ **Replies:** 1\ **Last updated:** [September 9, 2026, 3:41pm UTC](https://forum.phoscon.de/t/frient-wiszb-137-integration/6928 "2026-09-09T15:41:10Z")
Does anybody has experience integrating this vibration sensor into phoscon? I face 2 issues: The Sensor is not found during the normal “new Sensor” process There is no DDF to adjust the sensitivity, which is a key fea… --- ## [deCONZ GUI on Ubuntu GNOME 26.04.0 LTS](https://forum.phoscon.de/t/deconz-gui-on-ubuntu-gnome-26-04-0-lts/6927)
**Author:** [@OMR](https://forum.phoscon.de/u/OMR)\ **Replies:** 1\ **Last updated:** [September 8, 2026, 7:05pm UTC](https://forum.phoscon.de/t/deconz-gui-on-ubuntu-gnome-26-04-0-lts/6927 "2026-09-08T19:05:23Z")
Fired up deCONZ GUI for the first time after upgrading to Ubuntu 26.04.0 LTS over GNOME remote desktop (Wayland) from a Win11 using MS RDP client. It looks like this: (4k monitor) Any advise? omr@shs3:~$ uname -… --- ## [Any idea which DDF to use for Hobeian ZG-106Z light sensor?](https://forum.phoscon.de/t/any-idea-which-ddf-to-use-for-hobeian-zg-106z-light-sensor/6908)
**Author:** [@PatiB87](https://forum.phoscon.de/u/PatiB87)\ **Replies:** 7\ **Last updated:** [September 8, 2026, 5:00pm UTC](https://forum.phoscon.de/t/any-idea-which-ddf-to-use-for-hobeian-zg-106z-light-sensor/6908 "2026-09-08T17:00:18Z")
Hey, I am trying to pair a Hobeian ZG-106Z light sensor. I already searched the Deconz Toolbox for that model name but didn’t find anything, also not in the GitHub repo. It is this little thing: https://www.zigbee2mq… --- ## [Phoscon Home / room view missing from local web app](https://forum.phoscon.de/t/phoscon-home-room-view-missing-from-local-web-app/6916)
**Author:** [@AndyG](https://forum.phoscon.de/u/AndyG)\ **Replies:** 4\ **Last updated:** [September 4, 2026, 1:35pm UTC](https://forum.phoscon.de/t/phoscon-home-room-view-missing-from-local-web-app/6916 "2026-09-04T13:35:32Z")
Hi everyone, I recently migrated my deCONZ/Phoscon installation from an older Raspberry Pi system to a new Ubuntu-based mini PC. The Zigbee gateway itself is working correctly, but the locally hosted Phoscon web app st… --- ## [Segmentation fault in import of old backup (was: Can't contact RaspBee II after reinstall)](https://forum.phoscon.de/t/segmentation-fault-in-import-of-old-backup-was-cant-contact-raspbee-ii-after-reinstall/6921)
**Author:** [@Man-Grove](https://forum.phoscon.de/u/Man-Grove)\ **Replies:** 10\ **Last updated:** [August 29, 2026, 12:43pm UTC](https://forum.phoscon.de/t/segmentation-fault-in-import-of-old-backup-was-cant-contact-raspbee-ii-after-reinstall/6921 "2026-08-29T12:43:00Z")
After a reinstall of an original Pi Zero with Trixie, the RaspBee II isn’t reliably detected. It worked fine until reinstalling. Phoscon says “Firmware Not connected”. Firmware is the latest. sudo GCFFlasher\_internal -l … --- ## [Only direct connecteted devices ... no next hop](https://forum.phoscon.de/t/only-direct-connecteted-devices-no-next-hop/6923)
**Author:** [@dkotte](https://forum.phoscon.de/u/dkotte)\ **Replies:** 12\ **Last updated:** [August 24, 2026, 3:27pm UTC](https://forum.phoscon.de/t/only-direct-connecteted-devices-no-next-hop/6923 "2026-08-24T15:27:05Z")
Hi all, some days ago, my local zigbee cloud dies. In deCONZ i see only connections directly to the conBEE-II. Software is running as docker, so i tried old versions without success. everytime the same behaviour. Dev… --- ## [Can't update deConz 2.32.4 beta](https://forum.phoscon.de/t/cant-update-deconz-2-32-4-beta/6922)
**Author:** [@Mini1954](https://forum.phoscon.de/u/Mini1954)\ **Replies:** 6\ **Last updated:** [August 23, 2026, 10:10am UTC](https://forum.phoscon.de/t/cant-update-deconz-2-32-4-beta/6922 "2026-08-23T10:10:37Z")
I’m running conbee 2 with deConz 2.32.4 beta on raspberry pi (bookworm) and wanted to update to V33.2 stable. First I tried to update, using console, with “sudo systemctl stop deconz” and "wget -O deconz-latest.deb https… --- ## [Ustable phoscon app?](https://forum.phoscon.de/t/ustable-phoscon-app/6920)
**Author:** [@baunan](https://forum.phoscon.de/u/baunan)\ **Replies:** 3\ **Last updated:** [August 22, 2026, 12:24pm UTC](https://forum.phoscon.de/t/ustable-phoscon-app/6920 "2026-08-22T12:24:00Z")
Hi all, I am running deconz with a conbee II stick on a raspberry pi 3b+ for some years now and it has been stable up to now. It’s a standalone unit made with the deconz software. The Information is sent to Home Assista… [Next page](https://forum.phoscon.de/latest.md?page=1)